Simple digital temperature and process indicator comes with ABS plastic with polycarbonate graphics are used.

Design	Digital and Analog circuit based
Temperature Sensor Input	Thermocouple type J, K, or RTD (Pt-100)/2 or 3 wire (any one to be specified)
Temperature Range	0 to 400oC for J,K or (Pt-100) 0 to 1000oC for K type 0.0 to 199.9oC /-100.0 to 199.9oC for (Pt-100) (User to specify required range)
Process Input	(4-20)mA, (0-1)V, (0-5)V, (0-10)V
Process Range	0 to 1999 or -1999 to +1999 or 0 to 19999 or -19999 to +199999 with choice of Decimal point (User to specify required range)
Indicating Accuracy	+/-0.5% of the specified range for temperature input and Absolute to the process input
Display Size	3 and ½ digit or 4 digit or 4 and ½ digit 0.3”, 0.5”, 1.0”, 2.0” and 4.0” red/green seven segment LED.
Control Set Points	One or Two settable using potentiometer or thumb wheel switches.
Control Action	On/Off, Time Proportional or Analogue Proportional
Hysterisis, Band and Reset Control	Adjustable using front panel potentiometers (settings are model dependent).
Control Output	a) Relay changeover contacts(6A@230VAC) – preferred for ON/OFF control only (To drive external power contactors) b) Solid state relay driver (0 to 10) VDC pulse – preferred for Time Proportional control. c) Built in Solid-state relay or Triac (rated for 10A @ 230VAC) – preferred for Time Proportional control. d) Analog or triggering pulses for Triac for phase angle control {single phase} – preferred for proportional control.
Supply Voltage	90 to 250VAC, or 110VAC / 230VAC +/- 10% 50/60 Hz.
Enclosure	ABS Plastic for 1/8 din, ¼ din and Metal for others
Front Fascia	ABS plastic with polycarbonate graphics
Sizes in mm.	96 x 48, 48 x 96, 72 x 72, 96 x 96, 192 x 96 (for 0.3” to 2” display size). Bigger size for 4” display size.

APPLICATIONS: • Furnace / Oven control • Constant temp. Baths • Plastic / Packaging / Pharma industry • Cold Storage and Chilling plants • Laboratory equipment etc.

Our range of digital linearized temperature indicator and controller are used for police protection with PID/Program controller

Design	Digital and Linear circuit based with EPROM for look up table.
Temperature Sensor Input	Thermocouple B, C, D, E, J, K, R, S, T, or RTD (Pt – 100) {Any one to be specified}
Temperature Range	Full Range of the specified input sensor. J = 0 to 760°C, K =0 to 1372°C, R,S = 0 to 1768°C, B = 0 to 1820°C, C,D = 0 to 2000°C, Pt-100 = -200.0 to +200.0°C or 0.0 to 400.0°C.
Indicating Accuracy	Better than +/-0.1% of the specified range for temperature input. Linearized for +/- 1°C or +/- 0.1°C.
Display Size	4 digit 0.5”, 2.0” and 4.0” red/green seven segment LED.
Control Set Points	One or Two settable using thumbwheel switches.
Control Action	On/Off with fixed hysteresis of +/- 1°C or +/- 0.1°C.
Control Output	a) Relay changeover contacts(6A@230VAC) or / and b) Solid state relay driver (0 to 10) VDC pulse c) Built in Solid-state relay or Triac (rated for 10A @ 230VAC).
Supply Voltage	110VAC / 230VAC +/- 10% 50/60 Hz.
Enclosure	Metallic with ABS Bezel and Polycarbonate front fascia, weather proof / Flameproof enclosures are also available.
Front Fascia	ABS plastic with polycarbonate graphics
Sizes in mm.	96 x 96 x 160 mm., 192 x 96 x 160 mm

APPLICATIONS: • Heat treatment • Furnace / Oven control • Star / Delta changeover of heater loads • Police protection with PID/Program controller • Research & Development Centers • Physics, Ceramic and Metallurgy Dept. • Cold storage and Chilling plants

Our range of micro controller are based on 2 to 4 set points temperature and process controller

Design	High speed 8 bit micro controller based with 12bit ADC/DAC
Temperature Sensor Input / Process Input	Thermocouple type J, K, R, S, B, C, D or RTD(Pt-100) 2 or 3-wire input. DC voltage, (4 – 20)mA (Fixed / Universal in nature and it is user selectable using key board in combination with DIP switch.
Temperature Range / Process Range	Full range of the specified input type. For process input the range is programmable from 0 to 3500 count or -2000 to +2000 counts with the facility to select decimal point at 0.000, 00.00, 000.0 locations.
Resolution	0.1/1°C/unit for Temperature Subject to the specified input and range
Accuracy	Better than ± 0.1% of the specified range
Display	4 digit 0.5”/0.3” Red 7-segment LED display for process value 4 digit 0.5”/0.3” Red /Green 7-segment LED display for set value
Control Action	ON / OFF with programmable Hysterisis.
No. Of Set points	1 to 4 (HTC-723, HTC-948, HTC-489) 1 to 6 set points (HTC-966)
Control outputs	Built in 2 relays for 2 set point control, otherwise for 3 to 6 outputs DC pulses to drive external SSR or external relay card.
Output Configuration	Each output is configurable through key board for High Alarm, Low Alarm, Deviation Alarm or for OFF state – with programmable hysteresis.
Output indication	Front panel LED indication (OUT1 to OUT 8 – Model dependent)
Retransmission Signal (Optional facility)	2 independent 4-20mA signal proportional and linearized to input – 12 bit resolution (HTC-723 and HTC-966). One for PV and Other for SV.
Loop Supply (internal)	18 - 24VDC for external Two / Three wire Transmitter (optional)
Supply	90 to 250 VAC ± 10% (5VA), 50/60Hz.
Enclosure	ABS Plastic
Front Fascia	ABS plastic with polycarbonate graphics
Sizes in mm.	96 x 48, 48 x 96, 72 x 72, 96 x 96.

The digital portable thermometer that we have is single 9 volts dry cell, with very low consumption.

Probes	‘K’ type Thermocouple probe or RTD(PT-100) probe. Available in various shapes and sizes to meet all types of measurement.
Range	0 to1000°C using ‘K’ type probe 0 to 400°C or -100.0 to 200°C using(Pt-100) probe.
Accuracy	± 0.5 % in the range of (0-400)°C. ± 1.0% in the range (0-1000)°C.
Resolution	1°C or 0.1°C up to 199.9°C for RTD sensor only.
Display	3 & ½ Digit, 0.5" height LCD.
Polarity indication	Provided.
Over range indication	Provided.
CJC	Built in and Automatic.
Supply	Single 9 volts dry cell. (Very low consumption)
Low battery indication	Provided.
Operating Ambient	(0-50)°C
Dimensions	145 x 29 x 80 mm
Weight	200 gms (approx).

APPLICATIONS: • Designed for Industrial Use • Hot or Cold surface temperature • Liquid, Powder, Grain temperature • Gas or Air temperature • Rotating or Vibrating surface temperature • Cylindrical Surface temperature