Libratherm Instruments Private Limited
Dahisar East, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Thyristor Power Regulators for Resistive Load

Thyristor Power Regulators for Resistive and Inductive loads

Libratherm offers ready to use SCR power controller for electrical heating loads ranging from 3 KW/Single phase to 360KW/3-phase. This power controller module comprises of suitable triggering card model LTC-12 or LTC-13 or LTC-15 or LTC-18, suitably rated back to back connected SCR modules (with electrically isolated base, mounted on the heat sink, input and output clip-on type heavy duty connectors or copper bus bars, semiconductor fuses and thermal cutouts. The entire assembly is mounted on MS powder coated enclosure, which in turn can be easily mounted inside the closed control panel as desired. Complete ready to use control panel with suitable PID / Program temperature controller can also be supplied as per the user’s specifications and requirement.

Single Phase Thyristor Based Heater Power Regulator

Single Phase Thyristor Based Heater Power Regulator
  • Single Phase Thyristor Based Heater Power Regulator
  • Single Phase Thyristor Based Heater Power Regulator
  • Single Phase Thyristor Based Heater Power Regulator
Get Best Quote
Approx. Price: Rs 14,000 / Piece

Product Details:

Minimum Order Quantity1 Piece
BrandLIBRATHERM
ModelPOW-1-PA
TypeAutomatic, Semi-Automatic, Manual
Available Ratings2KW Single phase to 573KW Three phase
Smooth ControlAdjustable Ramp Up and Ramp Down Time for soft increase and decrease of output voltage.
SettingsFor adjusting voltage and current per phase using on card presets
Load TypeSuitable for both resistive and inductive / transformer load
Available ModelsAs given in the above table (Under Model wise description)
SizeAs per the Thyristor selection table given below.
MountingThyristor power regulators can be mounted on the base plate of the control panel using 4 screws/bolt
Available ConfigurationSingle phase, Two phase, Three phase (3 or 4 wire star and 3 or 6 wire delta)
Control ActionPhase angle control (self-synchronized)
Control Signal(4-20)mA / (0-5)VDC / (0-10)VDC / Potentiometer-user selectable
Output0 to 240VAC or 0 to 415V/440AC variable voltage proportional to the control signal.

Features:
  • 5 Amps to 460 Amps capacity (2KW to 573KW).
  • Single phase / 2 phase / 3 phase versions.
  • Suitable for 3 or 4 wire star configuration / 3 or 6 wire delta configurations.
  • Auto / Manual operation.
  • Accepts (4-20)mA / (0-5)VDC / (0-10)VDC control input (user selectable)
  • Soft start and step less smooth control.
  • Adjustable current control and over load trip feature.
  • Isolated heat sink for safety.
  • Simple and Modular design for easy servicing of firing cards and thyristors.
  • Ideally suitable for resistive, transformer, inductive or heating loads like Silicone Carbide and Molybdenum which exhibits significant changes of resistance with increase in temperature.
Applications:

Thyristor Power Controller has a varied application and can be used with heating elements like nichrome, Canthal, Super Canthal, Silicon Carbide, Molybdenum, Infra-Red, step up or step down transformer etc. where precise and accurate power and temperature control is required. There is a significant electrical power savings with respect to conventional contactor type temperature control system. Thyristors have many direct and indirect advantages compared to electro - mechanical contactor.

Model wise description

POW-1MEDIUM AND HIGH RATINGS SINGLE PHASE THYRISTORS (5KW TO 120KW)Size (h x w x d)
POW-1-PA-25A (5KW)Single phase thyristor power regulator - suitable for max. 5KW @ 240VAC (PANEL MOUNT)215 x 133 x 210
POW-1-PA-50A (12KW)Single phase thyristor power regulator - suitable for max. 12KW @ 240VAC (PANEL MOUNT)215 x 133 x 210
POW-1-PA-100A (24KW)Single phase thyristor power regulator - suitable for max. 24KW @ 240VAC (PANEL MOUNT)215 x 133 x 210
POW-1-PA-150A (36KW)Single phase thyristor power regulator - suitable for max. 36KW @ 240VAC (PANEL MOUNT)325 X 184 X240
POW-1-PA-250A (60KW)Single phase thyristor power regulator - suitable for max. 60KW @ 240VAC (PANEL MOUNT)325 X 184 X240
POW-1-PA-300A (72KW)Single phase thyristor power regulator - suitable for max. 72KW @ 240VAC (PANEL MOUNT)325 X 184 X240
POW-1-PA-400A (96KW)Single phase thyristor power regulator - suitable for max. 96KW @ 240VAC (PANEL MOUNT)385 X200 X240
POW-1-PA-500A (120KW)Single phase thyristor power regulator - suitable for max. 120KW @ 240VAC (PANEL MOUNT)385 X200 X240
Request
Callback


Additional Information:

  • Item Code: POW-1-PA
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
Yes! I am interested

Single Phase Thyristor Based Power Regulator Pow-1-pa-cl

Single Phase Thyristor Based Power Regulator Pow-1-pa-cl
  • Single Phase Thyristor Based Power Regulator Pow-1-pa-cl
  • Single Phase Thyristor Based Power Regulator Pow-1-pa-cl
  • Single Phase Thyristor Based Power Regulator Pow-1-pa-cl
Get Best Quote
Approx. Price: Rs 15,000 / Piece

Product Details:

TypeAutomatic, Manual, Semi-automatic
Control ActionPhase angle control (self-synchronized)
Control Signal(4-20)mA / (0-5)VDC / (0-10)VDC / Potentiometer-user selectable
Output0 to 240VAC or 0 to 415V/440AC variable voltage proportional to the control signal.
Smooth ControlAdjustable Ramp Up and Ramp Down Time for soft increase and decrease of output voltage. (Settable in
Current ControlUsing on card Current Limit and Trip settings. (LTC-13 and LTC-18)
SettingsFor adjusting voltage and current per phase using on card presets
Load TypeSuitable for both resistive and inductive / transformer load
Aux Supply Voltage240VAC +/- 10%, 50/60 Hz
Available ModelsAs given in the above table (Under Model wise description)
PhaseSingle Phase
SizeAs per the Thyristor selection table given below.
MountingThyristor power regulators can be mounted on the base plate of the control panel using 4 screws/bolt

Model Wise Descriptions:

POW-1MEDIUM AND HIGH RATINGS SINGLE PHASE THYRISTORS (5KW TO 120KW)Size
(h x w x d)
POW-1-PA-25A-CL (5KW)Single phase thyristor power regulator - suitable for max. 5KW @ 240VAC with current control and over load protection (PANEL MOUNT)215 x 133 x 210
POW-1-PA-50A-CL (12KW)Single phase thyristor power regulator - suitable for max. 12KW @ 240VAC with current control and over load protection (PANEL MOUNT)215 x 133 x 210
POW-1-PA-100A-CL (24KW)Single phase thyristor power regulator - suitable for max. 24KW @ 240VAC with current control and over load protection (PANEL MOUNT)215 x 133 x 210
POW-1-PA-150A-CL (36KW)Single phase thyristor power regulator - suitable for max. 36KW @ 240VAC with current control and over load protection (PANEL MOUNT)325 X 184 X240
POW-1-PA-250A-CL (60KW)Single phase thyristor power regulator - suitable for max. 60KW @ 240VAC with current control and over load protection (PANEL MOUNT)325 X 184 X240
POW-1-PA-300A-CL (72KW)Single phase thyristor power regulator - suitable for max. 72KW @ 240VAC with current control and over load protection (PANEL MOUNT)325 X 184 X240
POW-1-PA-400A-CL (96KW)Single phase thyristor power regulator - suitable for max. 96KW @ 240VAC with current control and over load protection (PANEL MOUNT)385 X200 X240
POW-1-PA-500A-CL (120KW)Single phase thyristor power regulator - suitable for max. 120KW @ 240VAC with current control and over load protection (PANEL MOUNT)385 X200 X240
Request
Callback


Additional Information:

  • Item Code: POW-1-PA-CL
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
Yes! I am interested

Two Phase SCR Power Regulator for Two Phase Heater POW-2-PA

Two Phase SCR Power Regulator for Two Phase Heater POW-2-PA
  • Two Phase SCR Power Regulator for Two Phase Heater POW-2-PA
  • Two Phase SCR Power Regulator for Two Phase Heater POW-2-PA
  • Two Phase SCR Power Regulator for Two Phase Heater POW-2-PA
Get Best Quote
Approx. Price: Rs 14,000 / Piece

Product Details:

Minimum Order Quantity1 Piece
BrandLIBRATHERM
TypeAnalog
Available Ratings2KW Single phase to 573KW Three phase
SettingsFor adjusting voltage and current per phase using on card presets
Load TypeSuitable for both resistive and inductive / transformer load
Model NumberPOW-2-PA
Available Models As given in the above table (Under Model wise description)
MountingThyristor power regulators can be mounted on the base plate of the control panel using 4 screws/bolt
Available ConfigurationTwo phase (3 or 4 wire star and 3 or 6 wire delta)
Control ActionPhase angle control (self-synchronized)
Control Signal(4-20)mA / (0-5)VDC / (0-10)VDC / Potentiometer-user selectable
Output 0 to 240VAC or 0 to 415V/440AC variable voltage proportional to the control signal.
Smooth ControlAdjustable Ramp Up and Ramp Down Time for soft increase and decrease of output voltage.
Current ControlUsing on card Current Limit and Trip settings. (LTC-13 and LTC-18)

Features:
  • 5 Amps to 460 Amps capacity (2KW to 573KW).
  • Single phase / 2 phase / 3 phase versions.
  • Suitable for 3 or 4 wire star configuration / 3 or 6 wire delta configurations.
  • Auto / Manual operation.
  • Accepts (4-20)mA / (0-5)VDC / (0-10)VDC control input (user selectable)
  • Soft start and step less smooth control.
  • Adjustable current control and over load trip feature.
  • Isolated heat sink for safety.
  • Simple and Modular design for easy servicing of firing cards and thyristors.
  • Ideally suitable for resistive, transformer, inductive or heating loads like Silicone Carbide and Molybdenum which exhibits significant changes of resistance with increase in temperature.
Model Wise Descriptions:

POW-2MEDIUM AND HIGH RATINGS TWO PHASE THYRISTORS (10KW TO  207KW)Size (h x w x d)
POW-2-PA-25A (10KW)Two phase thyristor power  regulator  -  suitable     for max. 10KW @ 415VAC (PANEL MOUNT)215 x 133 x 210
POW-2-PA-50A (21KW) Two phase thyristor power regulator - suitable for max. 21KW @ 415VAC (PANEL MOUNT)215 x 133 x 210
POW-2-PA-100A (42KW) Two phase thyristor power regulator - suitable for max. 42KW @ 415VAC (PANEL MOUNT)215 x 133 x 210
POW-2-PA-150A (62KW) Two phase thyristor power regulator - suitable   for max. 62KW @ 415VAC (PANEL MOUNT)325 X 184 X240
POW-2-PA-250A (103KW) Two phase thyristor power regulator - suitable for max. 103KW @ 415VAC (PANEL MOUNT)325 X 184 X240
POW-2-PA-300A (124KW) Two phase thyristor power regulator - suitable  for max. 124KW @ 415VAC  (PANEL MOUNT)325 X 184 X240
POW-2-PA-400A (166KW) Two phase thyristor power regulator - suitable  for max. 166KW @ 415VAC (PANEL MOUNT)325 X 184 X240
POW-2-PA-500A (207KW) Two phase thyristor power regulator - suitable  for max. 207KW @ 415VAC (PANEL MOUNT)325 X 184 X240


Applications:
Thyristor Power Controller has a varied application and can be used with heating elements like nichrome, Canthal, Super Canthal, Silicon Carbide, Molybdenum, Infra-Red, step up or step down transformer etc. where precise and accurate power and temperature control is required. There is a significant electrical power savings with respect to conventional contactor type temperature control system. Thyristors have many direct and indirect advantages compared to electro - mechanical contactor.
Request
Callback


Additional Information:

  • Item Code: POW-2-PA
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
Yes! I am interested

Two Phase SCR Power Regulator for 2 Phase Heater POW-2-PA-CL

Two Phase SCR Power Regulator for 2 Phase Heater POW-2-PA-CL
  • Two Phase SCR Power Regulator for 2 Phase Heater POW-2-PA-CL
  • Two Phase SCR Power Regulator for 2 Phase Heater POW-2-PA-CL
Get Best Quote
Approx. Price: Rs 15,000 / Piece

Product Details:

BrandLIBRATHERM
ModelPOW-2-PA-CL
TypeAutomatic, Semi-Automatic, Manual
Available Ratings2KW Single phase to 573KW Three phase
Smooth ControlAdjustable Ramp Up and Ramp Down Time for soft increase and decrease of output voltage.
Current ControlUsing on card Current Limit and Trip settings. (LTC-13 and LTC-18)
SettingsFor adjusting voltage and current per phase using on card presets
Load TypeSuitable for both resistive and inductive / transformer load
Aux Supply Voltage240VAC +/- 10%, 50/60 Hz
Available Models As given in the above table (Under Model wise description)
SizeAs per the Thyristor selection table given below.
MountingThyristor power regulators can be mounted on the base plate of the control panel using 4 screws/bolt
Available ConfigurationTwo phase (3 or 4 wire star and 3 or 6 wire delta)
Control ActionPhase angle control (self-synchronized)
Control Signal(4-20)mA / (0-5)VDC / (0-10)VDC / Potentiometer-user selectable
Output 0 to 240VAC or 0 to 415V/440AC variable voltage proportional to the control signal.

Description of Thyristor Power Regulators:

Libratherm offers ready to use SCR power controller for electrical heating loads ranging from 3 KW/Single phase to 360KW/3-phase. This power controller module comprises of suitable triggering card model LTC-12 or LTC-13 or LTC-15 or LTC-18, suitably rated back to back connected SCR modules (with electrically isolated base, mounted on the heat sink, input and output clip-on type heavy duty connectors or copper bus bars, semiconductor fuses and thermal cutouts. The entire assembly is mounted on MS powder coated enclosure, which in turn can be easily mounted inside the closed control panel as desired. Complete ready to use control panel with suitable PID / Program temperature controller can also be supplied as per the user’s specifications and requirement.

Model Wise Descriptions:


POW-2MEDIUM AND HIGH RATINGS TWO PHASE THYRISTORS (10KW TO  207KW)Size (h x w x d)
POW-2-PA-25A-CL (10KW) Two phase thyristor power regulator - suitable    for max. 10KW @ 415VAC   with current control and over load protection (PANEL MOUNT)215 x 133 x 210
POW-2-PA-50A-CL (21KW) Two phase thyristor power regulator - suitable for max. 21KW @ 415VAC   with current control and over load protection (PANEL MOUNT)215 x 133 x 210
POW-2-PA-100A-CL (42KW) Two phase thyristor power regulator - suitable for max. 42KW @ 415VAC   with current control and over load protection (PANEL MOUNT)215 x 133 x 210
POW-2-PA-150A-CL (62KW) Two phase thyristor power regulator - suitable   for max. 62KW @ 415VAC   with current control and over load protection (PANEL MOUNT)325 X 184 X240
POW-2-PA-250A-CL (103KW) Two phase thyristor power regulator - suitable  for max. 103KW @ 415VAC   with current control and over load protection  (PANEL MOUNT)325 X 184 X240
POW-2-PA-300A-CL (124KW) Two phase thyristor power regulator - suitable  for max. 124KW @ 415VAC   with current control and over load protection (PANEL MOUNT)325 X 184 X240
POW-2-PA-400A-CL (166KW) Two phase thyristor power regulator - suitable  for max. 166KW @ 415VAC with current control and over load protection (PANEL MOUNT)325 X 184 X240
POW-2-PA-500A-CL (207KW) Two phase thyristor power regulator - suitable  for max. 190KW @ 415VAC   with current control and over load protection (PANEL MOUNT)325 X 184 X240

Applications:

Thyristor Power Controller has a varied application and can be used with heating elements like nichrome, Canthal, Super Canthal, Silicon Carbide, Molybdenum, Infra-Red, step up or step down transformer etc. where precise and accurate power and temperature control is required. There is a significant electrical power savings with respect to conventional contactor type temperature control system. Thyristors have many direct and indirect advantages compared to electro - mechanical contactor.
Request
Callback


Additional Information:

  • Item Code: POW-2-PA-CL
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am interested

Three Phase SCR Power Regulator For Star Or Delta POW-3-PA

Three Phase SCR Power Regulator For Star Or Delta POW-3-PA
  • Three Phase SCR Power Regulator For Star Or Delta POW-3-PA
  • Three Phase SCR Power Regulator For Star Or Delta POW-3-PA
  • Three Phase SCR Power Regulator For Star Or Delta POW-3-PA
  • Three Phase SCR Power Regulator For Star Or Delta POW-3-PA
  • Three Phase SCR Power Regulator For Star Or Delta POW-3-PA
  • Three Phase SCR Power Regulator For Star Or Delta POW-3-PA
  • Three Phase SCR Power Regulator For Star Or Delta POW-3-PA
  • Three Phase SCR Power Regulator For Star Or Delta POW-3-PA
Get Best Quote
Approx. Price: Rs 28,000 / Piece

Product Details:

Minimum Order Quantity1 Piece
BrandLIBRATHERM
ModelPOW-3-PA
TypeAutomatic, Semi-Automatic, Manual
Available Ratings2KW Single phase to 573KW Three phase
Smooth ControlAdjustable Ramp Up and Ramp Down Time for soft increase and decrease of output voltage.
Current ControlUsing on card Current Limit and Trip settings. (LTC-13 and LTC-18)
SettingsFor adjusting voltage and current per phase using on card presets
Load TypeSuitable for both resistive and inductive / transformer load
Aux Supply VoltageAux Supply Voltage
Available Models As given in the above table (Under Model wise description)
SizeAs per the Thyristor selection table given below.
MountingThyristor power regulators can be mounted on the base plate of the control panel using 4 screws/bolt
Available ConfigurationThree phase (3 or 4 wire star and 3 or 6 wire delta)
Control ActionPhase angle control (self-synchronized)
Control Signal(4-20)mA / (0-5)VDC / (0-10)VDC / Potentiometer user selectable
Output 0 to 240VAC or 0 to 415V/440AC variable voltage proportional to the control signal.

Features:
  • 5 Amps to 460 Amps capacity (2KW to 573KW).
  • Single phase / 2 phase / 3 phase versions.
  • Suitable for 3 or 4 wire star configuration / 3 or 6 wire delta configurations.
  • Auto / Manual operation.
  • Accepts (4-20)mA / (0-5)VDC / (0-10)VDC control input (user selectable)
  • Soft start and step less smooth control.
  • Adjustable current control and over load trip feature.
  • Isolated heat sink for safety.
  • Simple and Modular design for easy servicing of firing cards and thyristors.
  • Ideally suitable for resistive, transformer, inductive or heating loads like Silicone Carbide and Molybdenum which exhibits significant changes of resistance with increase in temperature.

Model Wise Descriptions:

Applications:
Thyristor Power Controller has a varied application and can be used with heating elements like nichrome, Canthal, Super Canthal, Silicon Carbide, Molybdenum, Infra-Red, step up or step down transformer etc. where precise and accurate power and temperature control is required. There is a significant electrical power savings with respect to conventional contactor type temperature control system. Thyristors have many direct and indirect advantages compared to electro - mechanical contactor.

Model Wise Descriptions:

POW-3MEDIUM AND HIGH RATINGS THREE PHASE THYRISTORS (3 OR 4 WIRE STAR / 3 WIRE CLOSE DELTA CONFIGURATION)
(16KW TO  360KW)
Size
(h x w x d)
POW-3-PA-25A (16KW) Three phase thyristor power regulator - suitable for max. 16KW @ 415/440VAC (PANEL MOUNT)250 X 160 X 180
POW-3-PA-50A (33KW) Three phase thyristor power regulator - suitable for max. 33KW @ 415/440VAC (PANEL MOUNT) 275 X 85 X 210
POW-3-PA-100A (72KW) Three phase thyristor power regulator - suitable for max. 72KW @ 415/440VAC (PANEL MOUNT)325 X 184 X240
POW-3-PA-150A (105KW) Three phase thyristor power regulator - suitable for max. 105KW @ 415/440VAC (PANEL MOUNT)425 X 285 X 280
POW-3-PA-250A (180KW) Three phase thyristor power regulator - suitable for max. 180KW @ 415/440VAC (PANEL MOUNT)455 X 360 X 360
POW-3-PA-300A (215KW) Three phase thyristor power regulator - suitable for max. 215KW @ 415/440VAC (PANEL MOUNT)455 X 360 X 360
POW-3-PA-400A (288KW) Three phase thyristor power regulator - suitable for max. 190KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)455 X 360 X 360
POW-3-PA-500A (360KW) Three phase thyristor power regulator - suitable for max. 360KW @ 415/440VAC (PANEL MOUNT)500 X 400 X 300
Request
Callback


Additional Information:

  • Item Code: POW-3-PA
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
Yes! I am interested

Three Phase SCR Power Regulator for Star - Delta POW-3-PA-CL

Three Phase SCR Power Regulator for Star - Delta POW-3-PA-CL
  • Three Phase SCR Power Regulator for Star - Delta POW-3-PA-CL
  • Three Phase SCR Power Regulator for Star - Delta POW-3-PA-CL
  • Three Phase SCR Power Regulator for Star - Delta POW-3-PA-CL
  • Three Phase SCR Power Regulator for Star - Delta POW-3-PA-CL
  • Three Phase SCR Power Regulator for Star - Delta POW-3-PA-CL
Get Best Quote
Approx. Price: Rs 30,000 / Piece

Product Details:

BrandLIBRATHERM
TypeAnalog
Available Ratings2KW Single phase to 573KW Three phase
Current ControlUsing on card Current Limit and Trip settings. (LTC-13 and LTC-18)
SettingsFor adjusting voltage and current per phase using on card presets
Load TypeSuitable for both resistive and inductive / transformer load
Aux Supply Voltage240VAC +/- 10%, 50/60 Hz
Available ModelsAs given in the above table (Under Model wise description)
MountingThyristor power regulators can be mounted on the base plate of the control panel using 4 screws/bolt
Available ConfigurationThree phase (3 or 4 wire star and 3 or 6 wire delta)
Control ActionPhase angle control (self-synchronized)
Control Signal(4-20)mA / (0-5)VDC / (0-10)VDC / Potentiometer-user selectable
Output0 to 240VAC or 0 to 415V/440AC variable voltage proportional to the control signal.
Smooth ControlAdjustable Ramp Up and Ramp Down Time for soft increase and decrease of output voltage.

Description of Thyristor Power Regulators:

Libratherm offers ready to use SCR power controller for electrical heating loads ranging from 3 KW/Single phase to 360KW/3-phase. This power controller module comprises of suitable triggering card model LTC-12 or LTC-13 or LTC-15 or LTC-18, suitably rated back to back connected SCR modules (with electrically isolated base, mounted on the heat sink, input and output clip-on type heavy duty connectors or copper bus bars, semiconductor fuses and thermal cutouts. The entire assembly is mounted on MS powder coated enclosure, which in turn can be easily mounted inside the closed control panel as desired. Complete ready to use control panel with suitable PID / Program temperature controller can also be supplied as per the user’s specifications and requirement.

Model Wise Descriptions:

POW-3MEDIUM AND HIGH RATINGS THREE PHASE THYRISTORS (3 OR 4 WIRE STAR / 3 WIRE CLOSE DELTA CONFIGURATION)
(16KW TO  360KW)
Size
(h x w x d)
POW-3-PA-25A-CL (16KW) Three phase thyristor power regulator - suitable for max. 16KW @ 415/440VAC with current control and over load protection (PANEL MOUNT)325 X 184 X240
POW-3-PA-50A-CL (33KW) Three phase thyristor power regulator - suitable for max. 33KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)325 X 184 X240
POW-3-PA-100A-CL (72KW) Three phase thyristor power regulator - suitable for max. 72KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)385 X200 X240
POW-3-PA-150A-CL (105KW) Three phase thyristor power regulator - suitable for max. 105KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)425 X 285 X 280
POW-3-PA-250A-CL (180KW) Three phase thyristor power regulator - suitable for max. 180KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)455 X 360 X 360
POW-3-PA-300A-CL (215KW) Three phase thyristor power regulator - suitable for max. 215KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)455 X 360 X 360
POW-3-PA-400A-CL (288KW) Three phase thyristor power regulator - suitable for max. 288KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)455 X 360 X 360
POW-3-PA-500A-CL (360KW) Three phase thyristor power regulator - suitable for max. 360KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)500 X 400 X 300
Request
Callback


Additional Information:

  • Item Code: POW-3-PA-CL
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
Yes! I am interested

Three Phase SCR Power Controller for Open Delta POW-6-PA

Three Phase SCR Power Controller for Open Delta POW-6-PA
  • Three Phase SCR Power Controller for Open Delta POW-6-PA
  • Three Phase SCR Power Controller for Open Delta POW-6-PA
  • Three Phase SCR Power Controller for Open Delta POW-6-PA
Get Best Quote
Approx. Price: Rs 28,000 / Piece

Product Details:

Minimum Order Quantity1 Piece
BrandLIBRATHERM
ModelPOW-6-PA
TypeAutomatic, Semi-Automatic, Manual
Available Ratings2KW Single phase to 573KW Three phase
Smooth ControlAdjustable Ramp Up and Ramp Down Time for soft increase and decrease of output voltage.
Current ControlUsing on card Current Limit and Trip settings. (LTC-13 and LTC-18)
SettingsFor adjusting voltage and current per phase using on card presets
Load TypeSuitable for both resistive and inductive / transformer load
Aux Supply Voltage240VAC +/- 10%, 50/60 Hz
Available Models As given in the above table (Under Model wise description)
SizeAs per the Thyristor selection table given below.
MountingThyristor power regulators can be mounted on the base plate of the control panel using 4 screws/bolt
Available ConfigurationThree phase (3 or 4 wire star and 3 or 6 wire delta)
Control ActionPhase angle control (self-synchronized)
Control Signal(4-20)mA / (0-5)VDC / (0-10)VDC / Potentiometer-user selectable
Output 0 to 240VAC or 0 to 415V/440AC variable voltage proportional to the control signal.

Features:
  • 5 Amps to 460 Amps capacity (2KW to 573KW).
  • Single phase / 2 phase / 3 phase versions.
  • Suitable for 3 or 4 wire star configuration / 3 or 6 wire delta configurations.
  • Auto / Manual operation.
  • Accepts (4-20)mA / (0-5)VDC / (0-10)VDC control input (user selectable)
  • Soft start and step less smooth control.
  • Adjustable current control and over load trip feature.
  • Isolated heat sink for safety.
  • Simple and Modular design for easy servicing of firing cards and thyristors.
  • Ideally suitable for resistive, transformer, inductive or heating loads like Silicone Carbide and Molybdenum which exhibits significant changes of resistance with increase in temperature.

Description of Thyristor Power Regulators:

Libratherm offers ready to use SCR power controller for electrical heating loads ranging from 3 KW/Single phase to 360KW/3-phase. This power controller module comprises of suitable triggering card model LTC-12 or LTC-13 or LTC-15 or LTC-18, suitably rated back to back connected SCR modules (with electrically isolated base, mounted on the heat sink, input and output clip-on type heavy duty connectors or copper bus bars, semiconductor fuses and thermal cutouts. The entire assembly is mounted on MS powder coated enclosure, which in turn can be easily mounted inside the closed control panel as desired. Complete ready to use control panel with suitable PID / Program temperature controller can also be supplied as per the user’s specifications and requirement.

Model Wise Descriptions:
POW-6MEDIUM AND HIGH RATINGS THREE PHASE THYRISTORS (6 WIRE OPEN DELTA CONFIGURATION) (30KW TO  622KW)Size
(h x w x d)
POW-6-PA-25A (30KW) Three phase thyristor power regulator - suitable  for max. 30KW @ 415/440VAC (PANEL MOUNT)250 X 160 X 180
POW-6-PA-50A (63KW) Three phase thyristor power regulator - suitable  for max. 63KW @ 415/440VAC (PANEL MOUNT) 275 X 85 X 210
POW-6-PA-100A (124KW) Three phase thyristor power regulator - suitable  for max. 124KW @ 415/440VAC (PANEL MOUNT)325 X 184 X240
POW-6-PA-150A (186KW) Three phase thyristor power regulator - suitable  for max. 186KW @ 415/440VAC (PANEL MOUNT)425 X 285X 280
POW-6-PA-250A (311KW) Three phase thyristor power regulator - suitable  for max. 311KW @ 415/440VAC (PANEL MOUNT)455 X 360 X 360
POW-6-PA-250A-CL (311KW) Three phase thyristor power regulator - suitable  for max. 311KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)455 X 360 X 360
POW-6-PA-300A (373KW) Three phase thyristor power regulator - suitable  for max. 373KW @ 415/440VAC  (PANEL MOUNT)455 X 360 X 360
POW-6-PA-400A (498KW) Three phase thyristor power regulator - suitable  for max. 498KW @ 415/440VAC (PANEL MOUNT)455 X 360 X 360
POW-6-PA-500A (622KW) Three phase thyristor power regulator - suitable  for max. 622KW @ 415/440VAC (PANEL MOUNT)500 X 400 X 300
Request
Callback


Additional Information:

  • Item Code: POW-6-PA
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
Yes! I am interested

Three Phase SCR Power Controller for Open Delta POW-6-PA-CL

Three Phase SCR Power Controller for Open Delta POW-6-PA-CL
  • Three Phase SCR Power Controller for Open Delta POW-6-PA-CL
  • Three Phase SCR Power Controller for Open Delta POW-6-PA-CL
  • Three Phase SCR Power Controller for Open Delta POW-6-PA-CL
Get Best Quote
Approx. Price: Rs 30,000 / Piece

Product Details:

Minimum Order Quantity1 Piece
BrandLIBRATHERM
ModelPOW-6-PA -CL
TypeAutomatic, Semi-Automatic, Manual
Available Ratings2KW Single phase to 573KW Three phase
Smooth ControlAdjustable Ramp Up and Ramp Down Time for soft increase and decrease of output voltage.
Current ControlUsing on card Current Limit and Trip settings. (LTC-13 and LTC-18)
SettingsFor adjusting voltage and current per phase using on card presets
Load TypeSuitable for both resistive and inductive / transformer load
Aux Supply Voltage240VAC +/- 10%, 50/60 Hz
Available Models As given in the above table (Under Model wise description)
SizeAs per the Thyristor selection table given below.
MountingThyristor power regulators can be mounted on the base plate of the control panel using 4 screws/bolt
Available ConfigurationThree phase (3 or 4 wire star and 3 or 6 wire delta)
Control ActionPhase angle control (self-synchronized)
Control Signal(4-20)mA / (0-5)VDC / (0-10)VDC / Potentiometer-user selectable
Output0 to 240VAC or 0 to 415V/440AC variable voltage proportional to the control signal.

Applications:
Thyristor Power Controller has a varied application and can be used with heating elements like nichrome, Canthal, Super Canthal, Silicon Carbide, Molybdenum, Infra-Red, step up or step down transformer etc. where precise and accurate power and temperature control is required. There is a significant electrical power savings with respect to conventional contactor type temperature control system. Thyristors have many direct and indirect advantages compared to electro - mechanical contactor.

Description of Thyristor Power Regulators:

Libratherm offers ready to use SCR power controller for electrical heating loads ranging from 3 KW/Single phase to 360KW/3-phase. This power controller module comprises of suitable triggering card model LTC-12 or LTC-13 or LTC-15 or LTC-18, suitably rated back to back connected SCR modules (with electrically isolated base, mounted on the heat sink, input and output clip-on type heavy duty connectors or copper bus bars, semiconductor fuses and thermal cutouts. The entire assembly is mounted on MS powder coated enclosure, which in turn can be easily mounted inside the closed control panel as desired. Complete ready to use control panel with suitable PID / Program temperature controller can also be supplied as per the user’s specifications and requirement.

Model Wise Descriptions:

POW-6MEDIUM AND HIGH RATINGS THREE PHASE THYRISTORS (6 WIRE OPEN DELTA CONFIGURATION) (30KW TO  622KW)Size (h x w x d)
POW-6-PA-25A-CL (30KW) Three phase thyristor power regulator - suitable  for max. 30KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)325 X 184 X240
POW-6-PA-50A-CL (63KW) Three phase thyristor power regulator - suitable  for max. 63KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)325 X 184 X240
POW-6-PA-100A-CL (124KW) Three phase thyristor power regulator - suitable  for max. 124KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)385 X200 X240
POW-6-PA-150A-CL (186KW) Three phase thyristor power regulator - suitable  for max. 186KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)425 X 285X 280
POW-6-PA-250A-CL (311KW) Three phase thyristor power regulator - suitable  for max. 311KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)455 X 360 X 360
POW-6-PA-300A-CL (373KW) Three phase thyristor power regulator - suitable  for max. 373KW @ 415/440VAC   with current control and over load protection  (PANEL MOUNT)455 X 360 X 360
POW-6-PA-400A-CL (498KW) Three phase thyristor power regulator - suitable  for max. 498KW @ 415/440VAC   with current control and over load protection(PANEL MOUNT)455 X 360 X 360
POW-6-PA-500A-CL (622KW) Three phase thyristor power regulator - suitable  for max. 622KW @ 415/440VAC   with current control and over load protection (PANEL MOUNT)500 X 400 X 300
Request
Callback


Additional Information:

  • Item Code: POW-6-PA-CL
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
Yes! I am interested
X

Explore more products

Looking for “Thyristor Power Regulators for Resistive Load”?


Reach Us
Kamlesh Panchal (Managing Director)
No. 401-403, Diamond Industrial Estate, Ketki Pada Road Dahisar East
Mumbai- 400068, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS