Temperature Indicators
Our range of Digital and Microcontroller based Temperature / Process Indicator and Controller are used in different industries. Some of these products include -2 Set Points Temperature Process On-Off Controller, Digital Temperature Controllers, Temperature Process Indicator LPI-948-F, Two Set Points Temperature Process On-Off Controller and many more.These are developed and manufactured to suit varied industrial temperature and process indication and control applications where precise indicating and controlling accuracy.
Digital Process Controller
Request Callback
₹ 3500 / Piece Get Latest Price
Product Brochure
| Control Type | PID/On-Off |
| Model No. | DTC-903-R |
| Size | 96 x 96 mm |
| Input Type | Thermocouple, RTD, Current (mA) |
| Control output Type | Relay/SSR |
| Brand | Libratherm |
| Accuracy | 0.2% |
| Display Type | 4 Digit/7 Segment |
| Voltage | 110-230 VAC |
| Frequency | 50/60 Hz |
| Country of Origin | Made in India |
| Resistence | 0-500 R,0-1/5/10 K,1M |
| Display resolution | 1999 to 9999 fully configurable for linear input |
Minimum order quantity: 1 Piece
We are offering Process Control Ramp Soak Controller and various ranges.
Digital Controller:
• ON/OFF Temperature / Process Controller
• PID Temperature / Process Controller
• Digital Ramp / Soak Programmers
• Digital Multiloop Programmers
• Digital HVAC Controller
• Digital T+RH Controller
• Digital Deep Freezer Ultra Low Deep
Technical Specifications:
Input Thermocouple type J, K, or RTD(Pt-100) 2 or 3-wire or 4-20mA linear signal (User selectable)Range: For K type : 0 to 1372 Deg C, For J type : 0 to 760 Deg C.For Pt-100 : -199.9 to 200 Deg C or 0.0 to 400 Deg C or 0 to 600 Deg C.For 4-20mA : -1500 to 2000 or 0 to 3500 counts (With programmable decimal point)Resolution 0.1/1 Deg C Subject to the specified input and rangeDisplay 4 digit 0.5” Red 7-segment LED display for process value4 digit 0.5” Red 7-segment LED display for set value (*)CJC Built-in automatic from 0 - 50OcOpen sensor indication Fault message is displayed and outputs are turned off for fail safeoperation.Control Mode Heating or Cooling – user selectableNo. Of Set points Two, and configurable for High, Low, Deviation and Off mode.Control outputs 2 DC pulses (0 to 10VDC) and 2 Relay contacts (5A @ 230VAC) or2 DC pulses (0 to 10VDC) and 2 AC SSR or Triac (2A @ 230VAC)Output indication Front panel LED indication for Outputs and Selected set point.Retransmission Output 4-20mA proportional to displayed range of the selected input.RLmax = 400 OhmsKey board settings Front panel membrane key pad for parameter settings.
Digital Controller:
• ON/OFF Temperature / Process Controller
• PID Temperature / Process Controller
• Digital Ramp / Soak Programmers
• Digital Multiloop Programmers
• Digital HVAC Controller
• Digital T+RH Controller
• Digital Deep Freezer Ultra Low Deep
Technical Specifications:
Input Thermocouple type J, K, or RTD(Pt-100) 2 or 3-wire or 4-20mA linear signal (User selectable)Range: For K type : 0 to 1372 Deg C, For J type : 0 to 760 Deg C.For Pt-100 : -199.9 to 200 Deg C or 0.0 to 400 Deg C or 0 to 600 Deg C.For 4-20mA : -1500 to 2000 or 0 to 3500 counts (With programmable decimal point)Resolution 0.1/1 Deg C Subject to the specified input and rangeDisplay 4 digit 0.5” Red 7-segment LED display for process value4 digit 0.5” Red 7-segment LED display for set value (*)CJC Built-in automatic from 0 - 50OcOpen sensor indication Fault message is displayed and outputs are turned off for fail safeoperation.Control Mode Heating or Cooling – user selectableNo. Of Set points Two, and configurable for High, Low, Deviation and Off mode.Control outputs 2 DC pulses (0 to 10VDC) and 2 Relay contacts (5A @ 230VAC) or2 DC pulses (0 to 10VDC) and 2 AC SSR or Triac (2A @ 230VAC)Output indication Front panel LED indication for Outputs and Selected set point.Retransmission Output 4-20mA proportional to displayed range of the selected input.RLmax = 400 OhmsKey board settings Front panel membrane key pad for parameter settings.
On-Off Temperature Controller
Request Callback
₹ 3500 / Piece Get Latest Price
Product Brochure
| Control Type | On-Off |
| Brand | Libratherm |
| Model No. | DPC-912 |
| Size | 96 x 48 mm |
| Input Type | Thermocouple, RTD, Current (mA) |
| Control output Type | Relay/SSR, Analog (mA/mV) |
| Display Type | 3 Digit/7 Segment |
| Voltage | 110-230 VAC |
Libratherm offers various models of Digital Temperature and Process On/Off Controllers. User has the choice of selecting the model based on the type of input, type of analog or digital interface, and required size. All the models are designed to suit most of the Industrial Applications.
This Digital On/Off Safety Controller is available in the size of 96w x 48h x 75d mm, accepts input from J, K, thermocouple, Pt-100, 4-20mA, and provides 2 relay output or 2 SSR output along with retransmission of 4-20mA.
Key Features:- Microcontroller based design.
- Software linearized for better measurement accuracy.
- Works on universal 90-240 VAC.
- Universal and User selectable input from process transmitters/temperature sensors.
- 1 to 2 Relay or SSR Output.
- Industrial standard Analog and Digital Interface.
PID Temperature Controller
Request Callback
₹ 4500 / Piece Get Latest Price
Product Brochure
| Control Type | PID |
| Brand | Libratherm |
| Model No. | PID-913 |
| Size | 48 x 96 mm |
| Input Type | Current (mA), RTD, Thermocouple |
| Control output Type | Analog (mA/mV), Relay/SSR |
| Display Type | 4 Digit/7 Segment |
Libratherm offers various models of Digital Temperature and Process PID Controllers. The user has the choice of selecting the model based on the type of Input, type of analog or digital interface, and required size. All the models are designed to suit most of the Industrial applications.
This High-Temperature PID Controller is available in the size of 48w x 96h x 75d mm, accepts input from J, K, thermocouple, Pt-100, 4-20mA, and provides SSR output, 4-20mA output, 1 relay output.
Key Features:- Microcontroller based Design
- Software linearized for better measurement accuracy
- Field proven PID algorithm
- Works on universal 90-240VAC
- Universal and User selectable input from process transmitters/temperature sensors
- 1 to 4 Relay or SSR or 4-20mA/0-5V/0-10V control Output
- Industrial standard Analog and Digital Interface
Mini PID Temperature Controller
Request Callback
₹ 7000 / Piece Get Latest Price
Product Brochure
| Control Type | PID |
| Model No. | DPC-480 |
| Size | 48 x 48 mm |
| Input Type | Thermocouple, Voltage (mV), Current (mA), RTD |
| Control output Type | Relay/SSR, Analog (mA/mV) |
| Brand | Libratherm |
| Input Sensor | TC type J, K, R, S, B, C, D or RTD(Pt-100) 2 or 3-wire input, (0-10)V and (4-20)mA (Any One) |
| Temperature Range | Subject to the full range of the specified input |
| Display Type | 4 Digit/7 Segment |
Minimum order quantity: 1 Piece
One Or Two Set Point On-off Temperature Process Controller
Libratherm offers New version HTC-480 which are designed and developed using the latest micro-controller. The specification incorporated serves the every simple and critical process control applications of the industry. It accepts input from temperature sensors like thermocouple, RTD (Pt-100), Infrared thermocouple, or pyrometers generating mV or mA signals or from the level/flow/pressure/pH transmitters in the form of (4-20) mA. The input signals from thermocouples and RTD (Pt-100) are software Linearized for 1oC/0.1oC indicating accuracy. It can also be used for other process control applications like pressure control, level control etc. accepting input signals from the respective transmitter or transducers.
HTC-723 / HTC-966 accepts universal input. User can select one of 8 different types of input using back panel DIP switch. This is the added advantage over the fixed type of input.
The controller HTC-723 and HTC-966 has respectively 2 to 4 and 2 to 6 programmable set points. Each can be configured as either High Alarm or Low Alarm or Deviation Alarm or for Off state with programmable ON/OFF hysterisis through user friendly membrane key board. Dual 4 digits display allows simultaneous indications of the process value and the set value. In addition these models can give two nos. retransmission output of 4-20mA proportional to process value, for remote indication of the process value.
Features:
Application:
• Pressure control
• Heater bank selection
• Star delta changeover
• Level control
• Process industry
• Plastic / Packaging industry
Libratherm offers New version HTC-480 which are designed and developed using the latest micro-controller. The specification incorporated serves the every simple and critical process control applications of the industry. It accepts input from temperature sensors like thermocouple, RTD (Pt-100), Infrared thermocouple, or pyrometers generating mV or mA signals or from the level/flow/pressure/pH transmitters in the form of (4-20) mA. The input signals from thermocouples and RTD (Pt-100) are software Linearized for 1oC/0.1oC indicating accuracy. It can also be used for other process control applications like pressure control, level control etc. accepting input signals from the respective transmitter or transducers.
HTC-723 / HTC-966 accepts universal input. User can select one of 8 different types of input using back panel DIP switch. This is the added advantage over the fixed type of input.
The controller HTC-723 and HTC-966 has respectively 2 to 4 and 2 to 6 programmable set points. Each can be configured as either High Alarm or Low Alarm or Deviation Alarm or for Off state with programmable ON/OFF hysterisis through user friendly membrane key board. Dual 4 digits display allows simultaneous indications of the process value and the set value. In addition these models can give two nos. retransmission output of 4-20mA proportional to process value, for remote indication of the process value.
Features:
- Highly accurate and sturdy in operation.
- Elegant looks, Very easy to operate.
- Accepts standard type of thermocouple or RTD (Pt-100) 2 or 3-wire input.
- Control output of Relay or DC pulse or TRAIC.
- Programmable Hysterisis.
- User configurable output up to 4 or 6 set points.
- Models available in 2, 3 and 4 configurable set points
- High quality membrane keypad.
- Operates on Universal supply of 90 to 250 VAC, 50/60 Hz.
Application:
• Pressure control
• Heater bank selection
• Star delta changeover
• Level control
• Process industry
• Plastic / Packaging industry
PID Temperature Controller
Request Callback
₹ 4500 / Piece Get Latest Price
Product Brochure
| Control Type | PID |
| Model No. | PID-903 |
| Input Type | Thermocouple, RTD, Current (mA) |
| Control output Type | Analog (mA/mV), Relay/SSR |
| Brand | Libratherm |
| Display Type | 4 Digit/7 Segment |
Minimum order quantity: 1 Piece
Model Wise Description:
Features:
Applications:
Description:
Libratherm has contributed its 25 years of experience by designing these versatile series of microcontroller based Temperature/Process Indicators and controllers for general purpose Industrial usage.
These are developed and manufactured to suit varied industrial temperature and process indication and control applications where precise indicating and controlling accuracy.
The PID controller series PID-903, PID-912 and PID-913 in 1/8DIN and 1/4DIN cut out sizes, offers both on-off and linear or switching PID control logic and can be used for heating or any process control application with high or low configurable alarm relays. Linear PID control output can be used to control heating power through external Thyristor power regulator or through linear proportional valves in direct or reverse action or same 4-20mA can be used as linearized retransmission output. Please see details specification sheet as given below.
| Model | Product Description | Size w x h x d (mm.) |
| PID-903 | Temperature/Process PID controller with Relay/SSR/4-20mA Output | 96 x 96 x 75 |
| PID-912 | Temperature/Process PID controller with Relay/SSR/4-20mA Output | 96 x 48 x 75 |
| PID-913 | Temperature/Process PID controller with Relay/SSR/4-20mA Output | 48 x 96 x 75 |
Features:
- Latest and high speed 8-bit microcontroller based design
- 12-bit ADC and 12 bit DAC (4000 or +/-2000 counts)
- Fixed or User selectable input type
- 2 Relays or 2SSR driver and single 4-20mA analogue output
- On-Off, Time Proportional or PID (Direct/Reverse) control action
- Elegant looks and very user friendly operation.
- Light weight and low depth of just 75 mm.
- Operates on 12VDC/24VDC/230VAC / 90-240VAC
Applications:
- Electrical heater control in Boiler, Hot Air generator, heat exchanger etc.…
- Furnace and Oven control
- Deep freezer, chiller compressor control
- Any process control such as %Rh, Ph, ORP, Conductivity, Level etc.
- with High/Low Alarms
Description:
Libratherm has contributed its 25 years of experience by designing these versatile series of microcontroller based Temperature/Process Indicators and controllers for general purpose Industrial usage.
These are developed and manufactured to suit varied industrial temperature and process indication and control applications where precise indicating and controlling accuracy.
The PID controller series PID-903, PID-912 and PID-913 in 1/8DIN and 1/4DIN cut out sizes, offers both on-off and linear or switching PID control logic and can be used for heating or any process control application with high or low configurable alarm relays. Linear PID control output can be used to control heating power through external Thyristor power regulator or through linear proportional valves in direct or reverse action or same 4-20mA can be used as linearized retransmission output. Please see details specification sheet as given below.
Two Set Points Temperature Process On-off Controller
Request Callback
₹ 5000 / Piece Get Latest Price
Product Brochure
| Control Type | On-Off |
| Model No. | HTC-489 |
| Size | 48 x 96 mm |
| Input Type | RTD, Thermocouple, Current (mA), Voltage (mV) |
| Control output Type | Relay/SSR |
| Brand | Libratherm |
| Display Type | 4 Digit/7 Segment |
| Voltage | f 90 to 250 VAC |
| Application | Temperature control, Pressure control, Heater bank selection, Star delta changeover, Level control |
Two Set Points Temperature Process On-off Controller
Libratherm offers New version HTC-489 which are designed and developed using the latest micro-controller. The specification incorporated serves the every simple and critical process control applications of the industry. It accepts input from temperature sensors like thermocouple, RTD (Pt-100), Infrared thermocouple, or pyrometers generating mV or mA signals or from the level/flow/pressure/pH transmitters in the form of (4-20) mA. The input signals from thermocouples and RTD (Pt-100) are software Linearized for 1oC/0.1oC indicating accuracy. It can also be used for other process control applications like pressure control, level control etc. accepting input signals from the respective transmitter or transducers.
HTC-489 accepts universal input. User can select one of 8 different types of input using side panel DIP switch. This is the added advantage over the fixed type of input.
The controller HTC-948 and HTC-489 has 2 programmable set points. Each can be configured as either High Alarm or Low Alarm or Deviation Alarm or for Off state with programmable ON/OFF hysterisis through user friendly membrane key board. Dual 4 digits display allows simultaneous indications of the process value and the set value. In addition this model can give retransmission output of 4-20mA proportional to process value having 12bit resolution, which can be used for remote indication of the process value or input to other process controller or PLC.
Features:
Applications:
Libratherm offers New version HTC-489 which are designed and developed using the latest micro-controller. The specification incorporated serves the every simple and critical process control applications of the industry. It accepts input from temperature sensors like thermocouple, RTD (Pt-100), Infrared thermocouple, or pyrometers generating mV or mA signals or from the level/flow/pressure/pH transmitters in the form of (4-20) mA. The input signals from thermocouples and RTD (Pt-100) are software Linearized for 1oC/0.1oC indicating accuracy. It can also be used for other process control applications like pressure control, level control etc. accepting input signals from the respective transmitter or transducers.
HTC-489 accepts universal input. User can select one of 8 different types of input using side panel DIP switch. This is the added advantage over the fixed type of input.
The controller HTC-948 and HTC-489 has 2 programmable set points. Each can be configured as either High Alarm or Low Alarm or Deviation Alarm or for Off state with programmable ON/OFF hysterisis through user friendly membrane key board. Dual 4 digits display allows simultaneous indications of the process value and the set value. In addition this model can give retransmission output of 4-20mA proportional to process value having 12bit resolution, which can be used for remote indication of the process value or input to other process controller or PLC.
Features:
- Highly accurate and sturdy in operation.
- Elegant looks, Very easy to operate.
- Accepts standard type of thermocouple or RTD (Pt-100) 2 or 3-wire input.
- Control output of Relay or DC pulse or TRAIC.
- Programmable Hysterisis.
- User configurable output upto 2 set points.
- High quality membrane keypad.
- Operates on Universal supply of 90 to 250 VACS, 50/60 Hz.
Applications:
- Temperature control
- Pressure control
- Heater bank selection
- Star delta changeover
- Level control
- Input: Thermocouple type J, K, RTD(Pt-100) 2 or 3-wire input, (0-10)V and (4 – 20)mA ( single fixed or 4 Universal)
- Range: Subject to the full range of the specified input (Refer table)
- Resolution: 0.1/1 Degree C/ unit subject to the specified input and range
- Indicating Accuracy: Better than ± 1 Degree C / 0.1 Degree C /0.1 % of the specified range and the input (Software linearized for thermocouple and RTD inputs)
- Display: 4 digit 0.25” Red 7-segment LED display for process value. 4 digit 0.25” Green/Red 7-segment LED display for set value.
- CJC: Built-in automatic from 0 – 50 Degree C (applies only for thermocouple)
- Open sensor detection: Provided, outputs are turned off for fail safe operations.
- Control Mode: Each output is user configurable for High/Low/Deviation/Off state.
- Control Action: ON / OFF with programmable Hysterisis.
- No. of Set points: 2 set points programmable of range of selected input type.
- Control outputs: DC pulses or only 2 Relays or 2 AC SSR (Triacs).
Temperature Process Controller
Request Callback
₹ 6825 / Piece Get Latest Price
Product Brochure
| Control Type | On-Off |
| Size | 96 x 48 mm |
| Brand | Libratherm |
| Display Type | 4 Digit/7 Segment |
| Control output Type | Relay/SSR |
| Input Type | Current (mA), Voltage (mV), RTD, Thermocouple |
| Model No. | HTC-948 |
| Input Sensor | TC type J,K,R,S,B,C,D or RTD(Pt-100) 2 or 3-wire input,(0-10)V and (4-20)mA (Any One) |
Minimum order quantity: 1 Piece
2 Set Points Temperature Process On-Off Controller
Libratherm offers New version (Model HTC-948 and HTC-489) which are designed and developed using the latest micro-controller. The specification incorporated serves the every simple and critical process control applications of the industry. It accepts input from temperature sensors like thermocouple, RTD (Pt-100), Infrared thermocouple, or pyrometers generating mV or mA signals or from the level/flow/pressure/pH transmitters in the form of (4-20) mA. The input signals from thermocouples and RTD (Pt-100) are software Linearized for 1oC/0.1oC indicating accuracy. It can also be used for other process control applications like pressure control, level control etc. accepting input signals from the respective transmitter or transducers.
HTC-948 / HTC-489 accepts universal input. User can select one of 8 different types of input using side panel DIP switch. This is the added advantage over the fixed type of input.
The controller HTC-948 and HTC-489 has 2 programmable set points. Each can be configured as either High Alarm or Low Alarm or Deviation Alarm or for Off state with programmable ON/OFF hysterisis through user friendly membrane key board. Dual 4 digits display allows simultaneous indications of the process value and the set value. In addition this model can give retransmission output of 4-20mA proportional to process value having 12bit resolution, which can be used for remote indication of the process value or input to other process controller or PLC.
Features:
Applications:
Libratherm offers New version (Model HTC-948 and HTC-489) which are designed and developed using the latest micro-controller. The specification incorporated serves the every simple and critical process control applications of the industry. It accepts input from temperature sensors like thermocouple, RTD (Pt-100), Infrared thermocouple, or pyrometers generating mV or mA signals or from the level/flow/pressure/pH transmitters in the form of (4-20) mA. The input signals from thermocouples and RTD (Pt-100) are software Linearized for 1oC/0.1oC indicating accuracy. It can also be used for other process control applications like pressure control, level control etc. accepting input signals from the respective transmitter or transducers.
HTC-948 / HTC-489 accepts universal input. User can select one of 8 different types of input using side panel DIP switch. This is the added advantage over the fixed type of input.
The controller HTC-948 and HTC-489 has 2 programmable set points. Each can be configured as either High Alarm or Low Alarm or Deviation Alarm or for Off state with programmable ON/OFF hysterisis through user friendly membrane key board. Dual 4 digits display allows simultaneous indications of the process value and the set value. In addition this model can give retransmission output of 4-20mA proportional to process value having 12bit resolution, which can be used for remote indication of the process value or input to other process controller or PLC.
Features:
- Highly accurate and sturdy in operation.
- Elegant looks, Very easy to operate.
- Accepts standard type of thermocouple or RTD (Pt-100) 2 or 3-wire input.
- Control output of Relay or DC pulse or TRAIC.
- Programmable Hysterisis.
- User configurable output upto 2 set points.
- High quality membrane keypad.
- Operates on Universal supply of 90 to 250 VACS, 50/60 Hz.
Applications:
- Temperature control
- Pressure control
- Heater bank selection
- Star delta changeover
- Level control
Temperature and Process Indicator and Controller
Request Callback
₹ 4500 / Piece Get Latest Price
Product Brochure
| Control Type | Proportional |
| Model No. | DPI-902 |
| Size | 96 x 96 mm |
| Input Type | Thermocouple, RTD, Current (mA) |
| Control output Type | Analog (mA/mV) |
| Brand | Libratherm |
| Resolution | 1 Deg C for thermocouples and 0.1 Deg C for Pt-100. |
| Display Type | 4 Digit/7 Segment |
| Voltage | 110-230 VAC |
Minimum order quantity: 1 Piece
The Indicator series DPI-912 and DPI-902 offers Universal or fixed input of J, K or any other thermocouple, RTD(Pt-100) and 4-20mA linear signal. For temperature measurement 1 Degree C/0.1 Degree C Indicating accuracy is guaranteed using software linearization algorithm and with linearized retransmission output.
Model Wise Description:
Description:
Libratherm has contributed its 25 years of experience by designing these versatile series of microcontroller based Temperature/Process Indicators and controllers for general purpose Industrial usage.
These are developed and manufactured to suit varied industrial temperature and process indication and control applications where precise indicating and controlling accuracy.
The controller series DPC-903, DPI-912 and DPI-913 in 1/8DIN and 1/4DIN cut out sizes, offers both on-off and time proportional control logic and can be used for heating/cooling or any process control application with high/low configurable alarm relays. Linearized 4-20mA retransmission output is the added facility. Please see details specification sheet as given below.
Features:
Model Wise Description:
| Model | Product Description | Size w x h x d (mm.) |
| DPC-903 | Temperature/Process On-Off or Time proportional controller with Relay/SSR/(4-20)mA retransmission output | 96 x 96 x 75 |
| DPC-912 | Temperature/Process On-Off or Time proportional controller with Relay/SSR/(4-20)mA retransmission output | 96 x 48 x 75 |
| DPC-913 | Temperature/Process On-Off or Time proportional controller with Relay/SSR/ (4-20)mA retransmission output | 48 x 96 x 75 |
Description:
Libratherm has contributed its 25 years of experience by designing these versatile series of microcontroller based Temperature/Process Indicators and controllers for general purpose Industrial usage.
These are developed and manufactured to suit varied industrial temperature and process indication and control applications where precise indicating and controlling accuracy.
The controller series DPC-903, DPI-912 and DPI-913 in 1/8DIN and 1/4DIN cut out sizes, offers both on-off and time proportional control logic and can be used for heating/cooling or any process control application with high/low configurable alarm relays. Linearized 4-20mA retransmission output is the added facility. Please see details specification sheet as given below.
Features:
- Latest and high speed 8-bit microcontroller based design
- 12-bit ADC and 12 bit DAC (4000 or +/-2000 counts)
- Fixed or User selectable input type
- 2 Relays or 2SSR driver and single 4-20mA analogue output
- On-Off, Time Proportional or PID (Direct/Reverse) control action
- Elegant looks and very user friendly operation.
- Light weight and low depth of just 75 mm.
- Operates on 12VDC/24VDC/230VAC / 90-240VAC
- Indicating Accuracy: +/- 1 Degree C for Thermocouple throughout the range and +/- 0.1 Degree C for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal
- Electrical heater control in Boiler, Hot Air generator, heat exchanger etc.…
- Furnace and Oven control
- Deep freezer, chiller compressor control
- Any process control such as %Rh, Ph, ORP, Conductivity, Level etc.
- with High/Low Alarms
Large Display Process Indicator with 4-Inch Digit Height
Request Callback
₹ 15500 / Number Get Latest Price
Product Brochure
| Warranty | 1 Year |
| Model | DPI-4000-D |
| Brand | Libratherm |
| Display Type | Digital |
| Usage | Industrial |
| Color | RED |
| Country of Origin | Made in India |
Minimum order quantity: 1 Number
Libratherm offers large display digital indicator to monitor the temperature / process value from long distance or height. The indicator is housed in a sturdy powder coated metal enclosure and can be mounted at a height. It accepts factory set thermocouple, Pt-100 or universal analog signal of 4-2mA, 0-20mA, 0-5VDC or 0-10VDC which can be scaled and calibrated by user in the range of 0 to 4000 / 9999 counts or -1999 to 1999 / 9999 count with selection facility for decimal point.
Temperature Indicator DPI-967
Request Callback
₹ 8925 / Number Get Latest Price
| Brand | Libratherm |
| Model No. | DPI-967 - Temperature and Process Indicator (Part No: 1305) |
| Size | 96 x 96 mm |
| Input Type | RTD, Current (mA), Thermocouple, Voltage (mV) |
| Display Type | 5 Digit/7 Segment |
| Mounting Type | Panel |
| Country of Origin | Made in India |
Product Description:
Technical Specification:
Ordering Information:
DPI-967 – Temperature and Process Indicator.
Configuration: (1 AI + 1 AO + 1 SO)
Size: 96 x 96 x 120
Part No: 1305
- Microcontroller based Design.
- Software linearized for better measurement accuracy.
- Available in all standard DIN sizes.
- Works on universal 90-240 VAC.
- Universal and User selectable input from process transmitters/temperature sensors.
- Industrial standard Analog and Digital Interface.
| AI | Analog Input from Process transmitter in the form of 4-20mA or from the Temperature Sensors. |
| AO | Analog Output proportional to Analog input, available in the form of Retransmission output of 4-20mA or optionally 0 -10V. |
| SO | Serial Output in the form of RS-485 on MODBUS RTU interface. |
| Parametes | Description |
|---|---|
| Process Input | 4-20mA or 0-10V or Any other as required. |
| Display Range | -1999 to +9999 / 0 to 19999 with programmable decimal point |
| Resolution | 0.1,0.01,0.001 count |
| Temperature Input | Thermocouple type – J, K, RTD(Pt-100) or R, S, B sensor |
| Temperature Range | Full +ve range of the selected input type. |
| Resolution | 1 °C/0.1 °C for thermocouples and 0.1 °C/0.01 °C for Pt-100. |
| Sampling rate / Display rate | The input is read @40mS / the display is updated @1 second. |
| Indicating Accuracy | +/- 1 °C for Thermocouple throughout the range and +/- 0.1 °C for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal |
| Display | 5 digit 0.5" Red 7-segment display for process variable. 5 digit 0.5" Green 7-segment display for Input type and others. |
| Settings | Using Front panel Feather touch key board to set various parameters like Span Hi/Lo values, MODBUS slave ID, Input selection, calibration etc |
| Retransmission Output (Analog) | 4-20mA linearized and proportional to the selected input type and range. |
| Digital Interface | RS-485 over MODBUS RTU protocol in Slave Mode. |
| Supply | (90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional) |
| Size | 96 x 96 x 120 |
| Enclosure | ABS plastic with polycarbonate front graphic. |
Ordering Information:
| Sr. No. | Specifications | Part No. |
|---|---|---|
| 1.1 | Input : Pt-100/4-20mA /0-10V with RS485 interface | 1305 |
PWHT Six Zone Temperature Programmer PRC-6000
Request Callback
₹ 55000 / Piece Get Latest Price
Product Brochure
| Brand | LIBRATHERM |
| Country of Origin | Made in India |
| Input Sensor | K type thermocouple |
| Settings | Using front panel feather touch key board to set various parameters. |
| Control Output | 6 relay (C+NO1 to NO6) Contacts are rated for 5A @ 230VAC |
| Master or Slave optional | User programmable as Master or Slave for multi-zone control |
| Ramp or Soak Profile | 1 to 4 Steps (Pre heating + Ramp heating + soaking + cooling) |
| Ramp rate Pr | 1oC/hour to 1200oC/hour |
| Soak Temperature PL | Programmable for each steps in the full range of the specified input |
| Soaking Time Pd | 0.1 to 100Hour. (Resolution of 0.1 hour 6 minutes) |
| Program Hold Facility dHLd | Manual Hold or Auto Hold (Hold back feature for guaranteed Ramp/Soak facility). |
| Serial Communication Port One Optional | Galvanic isolated 2 wire RS485 -Modbus RTU protocol - for both master and slave |
| Number of Inputs | Six |
| Range | 1 to 1200 oC |
| Supply | 230VAC /115VAC +/-10% (Any one to be specified),50/60 Hz. @ 15VA |
| Serial Communication Port Two Optional | Galvanic isolated 2 wire RS485 -Modbus RTU protocol - for interface to computer |
| Size | 96w x 96h x 170d mm. |
| Panel Cutout | 92 x 92 mm. +/- 0.5 mm. |
| Enclosure | MS Powder coated with polycarbonate front graphic |
| Resolution | 1oC for thermocouples |
| Tuning | Manual tuning of PID values. |
| Indicating Accuracy | +/- 1 oC for Thermocouple throughout the range |
| Display Screen | Graphical LCD (Blue colour) with 6 windows for 6 zones |
| Output Indication | Available on the display screen |
| Control Algorithm | PID or ON/OFF (user selectable). |
| Open sensor indication | OPEn flashes on the display and control action is turned off for that zone. |
Model Wise Description:
Description:
Libratherm manufactures Six zone Microcontroller based multiple Ramp / Soak programmable PID / On-Off temperature controller cum profile programmer Model PRC-6000 which is designed to improve reliability, accuracy and control of six independent heating zones. It features Ramp and Soak functions (the capability to control the temperature and its rate of change over a predetermined time span). Single and common pattern of 4 ramp/soak steps – (Fixed pattern of 1st pre-heating ramp, 2nd heating ramp, 3rd soaking and 4th cooling ramp) for all six zones or each of the six zone can be independently programmed and stored in the memory. PRC-6000 can also be used as single set point control when the ramp/soak profile control is not desired. PRC-6000 accepts six K type thermocouples and provides outputs in the form of 6 relay contacts in PID or ON/OFF control mode. An extra relay contact is provided to indicate the thermocouple fault condition.
PRC-6000 offers blue colour graphical LCD screen to display temperature of all six zones simultaneously on a single screen. The programmed and running ramp/soak profile can be easily monitored. The front panel keyboard allows programing of ramp/soak profile, PID values, deviation hold values and viewing of various status parameters for all six zones under control. Through keyboard, user can operate each heating zone either in Auto mode or Manual mode.
To monitor the online temperature profile of the heating system, RS 485 serial communication interface can be optionally provided, the same can be connected to the computer. Libratherm provides the window based software to program the controller and to view the online behavior of the heating cycle in both graphical and tabular format. Extra RS485 port can be provided for Master/Slave programming with single master and maximum 10 slaves.
Features:
Applications:
| Model | Description | Size w x h x d (mm.) |
| PRC-6000 | Six input/output and Six independent 4 steps profile programmer cum temperature controller | 96 x 96 x 160 |
Description:
Libratherm manufactures Six zone Microcontroller based multiple Ramp / Soak programmable PID / On-Off temperature controller cum profile programmer Model PRC-6000 which is designed to improve reliability, accuracy and control of six independent heating zones. It features Ramp and Soak functions (the capability to control the temperature and its rate of change over a predetermined time span). Single and common pattern of 4 ramp/soak steps – (Fixed pattern of 1st pre-heating ramp, 2nd heating ramp, 3rd soaking and 4th cooling ramp) for all six zones or each of the six zone can be independently programmed and stored in the memory. PRC-6000 can also be used as single set point control when the ramp/soak profile control is not desired. PRC-6000 accepts six K type thermocouples and provides outputs in the form of 6 relay contacts in PID or ON/OFF control mode. An extra relay contact is provided to indicate the thermocouple fault condition.
PRC-6000 offers blue colour graphical LCD screen to display temperature of all six zones simultaneously on a single screen. The programmed and running ramp/soak profile can be easily monitored. The front panel keyboard allows programing of ramp/soak profile, PID values, deviation hold values and viewing of various status parameters for all six zones under control. Through keyboard, user can operate each heating zone either in Auto mode or Manual mode.
To monitor the online temperature profile of the heating system, RS 485 serial communication interface can be optionally provided, the same can be connected to the computer. Libratherm provides the window based software to program the controller and to view the online behavior of the heating cycle in both graphical and tabular format. Extra RS485 port can be provided for Master/Slave programming with single master and maximum 10 slaves.
Features:
- Accepts six K type (Cr/Al) of thermocouple.
- Blue colour graphical LCD screen for clear visibility
- Six independent control Relay.
- Servo start from the current process temperature.
- 1 to 4 programmable ramp/soak steps with rate programming facility
Applications:
- Furnace / oven control
- PWHT and SR heat treatment cycle
Temperature And Process Indicator With Fixed/Universal Input
Request Callback
₹ 5000 / Piece Get Latest Price
Product Brochure
| Display Type | Digital |
| Size | 96 x 96 x 120 mm |
| Model | HTI-966 |
Minimum order quantity: 1 Piece
Libratherm offers New version HTI-966 which are designed and developed using the latest micro-controller. The specification incorporated serves the every simple and critical process measurement applications of the industry. It accepts input from temperature sensors like thermocouple, RTD (Pt-100), Infrared thermocouple, or pyrometers generating mV or mA signals or from the level/flow/pressure/pH transmitters in the form of (4-20) mA. The input signals from thermocouples and RTD (Pt-100) are software Linearized for 1oC / 0.1oC indicating accuracy. It can also be used for measurement of other process parameter accepting input signals from the process transmitter or transducers with facility to select the decimal point on the display.
HTI-966 accept universal input. User can select one of 8 different types of input using DIP switch accessible to the user. This is the added advantage over the fixed type of input. Digital interface on RS485 lines and analog retransmission, linearized to the input as 4-20mA on RL max of 400 ohms are also available from these indicators.
Features:
Application:
• On line and continuous measurement of Industrial Temperature and Process values with facility for analog and digital interface to DCS, PLC or Process controllers..
HTI-966 accept universal input. User can select one of 8 different types of input using DIP switch accessible to the user. This is the added advantage over the fixed type of input. Digital interface on RS485 lines and analog retransmission, linearized to the input as 4-20mA on RL max of 400 ohms are also available from these indicators.
Features:
- Highly accurate and sturdy in operation.
- Elegant in appearance and very easy to operate.
- Accepts standard type of thermocouple or RTD (Pt-100) 2 or 3-wire input.
- High quality membrane keypad.
- Operates on Universal supply of 90 to 250 VAC, 50/60 Hz.
- 4-20 mA Retransmission of high resolution and RS485 interface can be given to PLC.
Application:
• On line and continuous measurement of Industrial Temperature and Process values with facility for analog and digital interface to DCS, PLC or Process controllers..
Temperature Indicator DPI-966
Request Callback
₹ 4200 / Number Get Latest Price
| Input Type | RTD, Thermocouple, Current (mA) |
| Display Type | Digital |
| Size | 96 x 96 mm |
| Model Name/Number | Temperature Indicator - DPI-966 (Part No: 1302-1-1) |
| Brand | Libratherm |
| Mounting Type | Panel |
| Country of Origin | Made in India |
Product Description:
Configuration:
Technical Specification:
Ordering Information:
DPI-966 – Temperature and Process Indicator.
Configuration: (1 AI + 1 AO + 1 SO)
Size: 96 x 96 x 120
Part No: 1302
- Microcontroller based Design.
- Software linearized for better measurement accuracy.
- Available in all standard DIN sizes.
- Works on universal 90-240 VAC.
- Universal and User selectable input from process transmitters/temperature sensors.
- Industrial standard Analog and Digital Interface.
Configuration:
| AI | Analog Input from Process transmitter in the form of 4-20mA or from the Temperature Sensors. |
| AO | Analog Output proportional to Analog input, available in the form of Retransmission output of 4-20mA or optionally 0 -10V. |
| SO | Serial Output in the form of RS-485 on MODBUS RTU interface. |
Technical Specification:
| Parametes | Description |
|---|---|
| Process Input | 4-20mA or 0-10V |
| Display Range | -2000 to +2000 or 0 to 4000 count with programmable decimal point |
| Resolution | 0.1,0.01,0.001 |
| Temperature Input | Thermocouple type – J, K, RTD(Pt-100) or R, S, B thermocouple |
| Temperature Range | As shown in the Ordering Information table. |
| Resolution | 1oC for thermocouples and 0.1oC for Pt-100. |
| Sampling rate / Display rate | The input is read @40mS / the display is updated @1 second. |
| Indicating Accuracy | +/- 1oC for Thermocouple throughout the range and +/- 0.1oC for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal |
| Display | 4 digit 0.5" Red 7-segment display for process variable. |
| 4 digit 0.5" Green 7-segment display for input type | |
| Settings | Using Front panel feather touch key board to set various parameters like span HI/LO values, MODBUS slave ID, Input selection, calibration etc |
| Retransmission Output (Analog) | 4-20mA linearized and proportional to the selected input type and range |
| Digital Interface | RS-485 over MODBUS RTU protocol in Slave Mode. |
| Supply | (90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional) |
| Size | 96 x 96 x 120 |
| Enclosure | ABS plastic with polycarbonate front graphic. |
Ordering Information:
| Sr. No. | Specifications | Part No. |
|---|---|---|
| 1.1 | Input : J,K,Pt-100,4-20mA | 1302-1-1 |
| 1.2 | Input : J,K,Pt-100,4-20mA with (4-20)mA retransmission | 1302-1-2 |
| 1.3 | Input : J,K,Pt-100,4-20mA with RS485 interface | 1302-1-3 |
| 1.4 | Input : R,S,B thermocouple | 1302-2-1 |
| 1.5 | Input : R,S,B with (4-20)mA retransmission | 1302-2-2 |
| 1.6 | Input : R,S,B with RS-485 interface | 1302-2-3 |
Temperature Indicator DPI-966-T
Request Callback
₹ 6825 / Number Get Latest Price
| Input Type | Thermocouple, RTD, Current (mA) |
| Display Type | Digital |
| Size | 96 x 96 mm |
| Model Name/Number | Temperature Indicator - DPI-966-T (Part No: 1307-1) |
| Brand | Libratherm |
| Mounting Type | Panel |
| Country of Origin | Made in India |
Product Description:
Technical Specification:
Ordering Information:
DPI-966-T – Temperature and Process Indicator.
Configuration: (2 AI + 2 AO + 1 SO)
Size: 96 x 96 x 120
Part No: 1307
- Microcontroller based Design.
- Software linearized for better measurement accuracy.
- Available in all standard DIN sizes.
- Works on universal 90-240 VAC.
- Universal and User selectable input from process transmitters/temperature sensors.
- Industrial standard Analog and Digital Interface.
Technical Specification:
| Parametes | Description |
|---|---|
| Process Input 1 and 2 | 4-20mA or 0-10V |
| Display Range | -2000 to +2000 or 0 to 4000 count with programmable decimal point |
| Resolution | 0.1,0.01,0.001 |
| Temperature Input 1 and 2 | Thermocouple type – J, K, RTD(Pt-100) or R, S, B thermocouple (Any one to be specified by User – and not user selectable) |
| Temperature Range | As shown in the Ordering Information table. |
| Resolution | 1oC for thermocouples and 0.1oC for Pt-100. |
| Sampling rate / Display rate | The input is read @40mS / the display is updated @1 second. |
| Indicating Accuracy | +/- 1oC for Thermocouple throughout the range and +/- 0.1oC for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal |
| Display | 4 digit 0.5" Red 7-segment display for 1st Input reading. |
| 4 digit 0.5" Green 7-segment display for 2nd input reading. | |
| Settings | Using Front panel feather touch the keyboard to set various parameters like SPAN HI/LO values, MODBUS Slave ID, Input selection, calibration, etc |
| Retransmission Output (Analog) | 4-20mA linearized and proportional to the selected input type and range. Available for each Input. (Optional) |
| Digital Serial Interface | Optically isolated 2 wire RS485 over Modbus RTU protocol. (Slave mode with programmable Modbus address). (Optional) |
| Supply | (90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional) |
| Size | 96 x 96 x 120 |
| Enclosure | ABS plastic with polycarbonate front graphic. |
Ordering Information:
| Sr. No. | Specifications | Part No. |
|---|---|---|
| 1.1 | Input1 and Input 2 : J T/C with no interface | 1307-1 |
| 1.2 | Input1 and Input 2 : J T/C + Dual 4-20mA Retransmission | 1307-2 |
| 1.3 | Input1 and Input 2 : J T/C + RS-485 interface | 1307-3 |
| 2.1 | Input1 and Input 2 : K T/C with no interface | 1307-4 |
| 2.2 | Input1 and Input 2 : K T/C + Dual 4-20mA Retransmission | 1307-5 |
| 2.3 | Input1 and Input 2 : K T/C + RS4-85 interface | 1307-6 |
| 3.1 | Input1 and Input 2 : (Pt-100) with no interface | 1307-7 |
| 3.2 | Input1 and Input 2 : (Pt-100) + Dual 4-20mA Retransmission | 1307-8 |
| 3.3 | Input1 and Input 2 : (Pt-100) + RS-485 interface | 1307-9 |
| 4.1 | Input1 and Input 2 : (4-20)mA with no interface | 1307-10 |
| 4.2 | Input1 and Input 2 : (4-20)mA + Dual 4-20mA Retransmission | 1307-11 |
| 4.3 | Input1 and Input 2 : (4-20)mA + RS-485 interface | 1307-12 |
Temperature Indicator DPI-912
Request Callback
₹ 3675 / Number Get Latest Price
| Input Type | Thermocouple, RTD, Current (mA) |
| Display Type | 4 Digit/7 Segment |
| Model No. | DPI-912 (Part No: 1303-1) |
| Size | 96 x 48 mm |
| Brand | Libratherm |
| Mounting Type | Panel |
| Country of Origin | Made in India |
Product Description:
Key Features:
Technical Specification:
Ordering Information:
DPI-912 – Temperature and Process Indicator.
Configuration: (1 AI + 1 AO)
Size: 96 x 48 x 75
Part No: 1303
Key Features:
- Microcontroller based Design.
- Software linearized for better measurement accuracy.
- Available in all standard DIN sizes.
- Works on universal 90-240 VAC.
- Universal and User selectable input from process transmitters/temperature sensors.
- Industrial standard Analog and Digital Interface.
| AI | Analog Input from Process transmitter in the form of 4-20mA or from the Temperature Sensors. |
| AO | Analog Output proportional to Analog input, available in the form of Retransmission output of 4-20mA or optionally 0 -10V. |
| SO | Serial Output in the form of RS-485 on MODBUS RTU interface. |
Technical Specification:
| Parametes | Description |
|---|---|
| Process Input | 4-20mA or 0-10V |
| Display Range | -2000 to +2000 or 0 to 4000 count with programmable decimal point |
| Resolution | 0.1,0.01,0.001 |
| Temperature Input | Thermocouple type – J, K, RTD(Pt-100) or R, S, B thermocouple |
| Temperature Range | As shown in the Ordering Information table. |
| Resolution | 1 °C for thermocouples and 0.1 °C for Pt-100. |
| Sampling rate / Display rate | The input is read @40mS / the display is updated @1 second. |
| Indicating Accuracy | +/- 1oC for Thermocouple throughout the range and +/- 0.1oC for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal |
| Display | 4 digit 0.33" Red 7-segment display for process variable. LED Indications for Input type |
| Settings | Using Front panel feather touch key board to set various parameters like span HI/LO values, MODBUS slave ID, Input selection, calibration etc |
| Retransmission Output (Analog) | 4-20mA linearized and proportional to the selected input type and range. |
| Supply | (90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional) |
| Size | 96 x 48 x 75 |
| Enclosure | ABS plastic with polycarbonate front graphic. |
Ordering Information:
| Sr. No. | Specifications | Part No. |
|---|---|---|
| 1.1 | Input : J,K,Pt-100,4-20mA | 1303-1 |
| 1.2 | Input : J,K,Pt-100,4-20mA with 4-20mA retransmission | 1303-2 |
| 1.3 | Input : R,S,B T/C | 1303-3 |
| 1.4 | Input : R,S,B T/C + 4-20mA retransmission | 1303-4 |
Temperature Indicator DPI-948
Request Callback
₹ 4200 / Number Get Latest Price
| Display Type | Digital |
| Model No. | DPI-948 (Part No: 1301-1-1) |
| Size | 96 x 48 mm |
| Brand | Libratherm |
| Mounting Type | Panel |
| Model Name/Number | Temperature Indicator - DPI-948 |
| Country of Origin | Made in India |
Product Description:
Key Features:
Technical Specification:
Ordering Information:
DPI-948 – Temperature and Process Indicator.
Configuration: (1 AI + 1 AO + 1 SO)
Size: 96 x 48 x 120
Part No: 1301
Key Features:
- Microcontroller based Design.
- Software linearized for better measurement accuracy.
- Available in all standard DIN sizes.
- Works on universal 90-240 VAC.
- Universal and User selectable input from process transmitters/temperature sensors.
- Industrial standard Analog and Digital Interface.
| AI | Analog Input from Process transmitter in the form of 4-20mA or from the Temperature Sensors. |
| AO | Analog Output proportional to Analog input, available in the form of Retransmission output of 4-20mA or optionally 0 -10V. |
| SO | Serial Output in the form of RS-485 on MODBUS RTU interface. |
Technical Specification:
| Parametes | Description |
|---|---|
| Process Input | 4-20mA or 0-10V or Any other as required. |
| Display Range | -2000 to +2000 or 0 to 4000 count with programmable decimal point |
| Resolution | 0.1,0.01,0.001 count |
| Temperature Input | Thermocouple type – J, K, RTD(Pt-100) or R, S, B sensor |
| Temperature Range | Full +ve range of the selected input type. |
| Resolution | 1 °C/0.1 °C for thermocouples and 0.1 °C/0.01 °C for Pt-100. |
| Sampling rate / Display rate | The input is read @40mS / the display is updated @1 second. |
| Indicating Accuracy | +/- 1 °C for Thermocouple throughout the range and +/- 0.1 °C for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal |
| Display | 4 digit 0.33" Red 7-segment display for process variable. 4 digit 0.33" Green 7-segment display for Input type and others. |
| Settings | Using Front panel Feather touch key board to set various parameters like Span Hi/Lo values, MODBUS slave ID, Input selection, calibration etc |
| Retransmission Output (Analog) | 4-20mA linearized and proportional to the selected input type and range. |
| Digital Interface | RS-485 over MODBUS RTU protocol in Slave Mode. |
| Supply | (90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional) |
| Size | 96 x 48 x 120 |
| Enclosure | ABS plastic with polycarbonate front graphic. |
Ordering Information:
| Sr. No. | Specifications | Part No. |
|---|---|---|
| 1.1 | Input : J,K,Pt-100,4-20mA | 1301-1-1 |
| 1.2 | Input : J,K,Pt-100,4-20mA with (4-20)mA retransmission | 1301-1-2 |
| 1.3 | Input : J,K,Pt-100,4-20mA with RS485 interface | 1301-1-3 |
| 1.4 | Input : R,S,B thermocouple | 1301-2-1 |
| 1.5 | Input : R,S,B with (4-20)mA retransmission | 1301-2-2 |
| 1.6 | Input : R,S,B with RS-485 interface | 1301-2-3 |
Liquid Level Controller (Electrode Based) LLC-06
Request Callback
₹ 3500 / Piece Get Latest Price
Product Brochure
| Type | Automatic |
| No of Inputs | 6 |
| Mounting Type | Panel Mount |
| Supply | 180 to 250VAC, 50/60 Hz |
| Brand | Libratherm |
| Size | 192(w) x 96(h) x 200(d)mm. |
| Input | 6 nos. of level sensors each of 4 wires (3 + 1 common) |
| Sensor Type | Steel or Metallic rods - When two rods are dip in the liquid - the contact is detected to be made |
| Relay contacts | Two sets of relay change-over contacts per tank. Both can be operated in the desired logic |
| LED display | Front panel LED shows the status of levels and relay outputs. |
| Enclosure | Dust free-Metallic powder coated |
| Weight | 1.0 Kg (approx) |
| Mounting | Flush panel mounting. |
Minimum order quantity: 1 Piece
PRODUCT DESCRIPTION:
Libratherm offers six tank liquid level controller model LLC-06, designed to control the liquid level in the six independent tanks. It accepts 4 wire (3 + 1 common) of liquid level sensor in the form of potential free contacts for each tank to detect HI level, MED level and LOW level. Internal electronics circuit monitors the level from the level sensors and displays the status of each using the front panel LEDs. Two sets of 5A @ 230VAC relay contact output is provided for each tank, which can be used to control the Feed pump or the Delivery pump as per the users requirement. The controller operates on 230VAC supply and is available in 1/2 DIN size of 192 x 96 x 200 mm.
LLC-06 finds its application in the industries manufacturing breweries, aerated drinks, fruit juices, pharmaceutical syrups etc... where to prepare final product the different liquids are mixed from the different tanks and maintaining their level is a critical process. The controller featured here can maintain the desired levels of up to six tanks.
Temperature and Process Indicator with 2 inputs HTI-966-T
Request Callback
₹ 5000 / Piece Get Latest Price
Product Brochure
| Display Type | Digital |
| Brand | Libratherm |
| Model | HTI-966-T |
| Two Inputs | Simultaneous - Two independent fixed inputs of the same type can also be used.Available only DTI-966 |
Minimum order quantity: 1 Piece
Libratherm offers New version HTI-966-T which are designed and developed using the latest micro-controller. The specification incorporated serves the every simple and critical process measurement applications of the industry. It accepts input from temperature sensors like thermocouple, RTD (Pt-100), Infrared thermocouple, or pyrometers generating mV or mA signals or from the level/flow/pressure/pH transmitters in the form of (4-20) mA. The input signals from thermocouples and RTD (Pt-100) are software Linearized for 1oC / 0.1oC indicating accuracy. It can also be used for measurement of other process parameter accepting input signals from the process transmitter or transducers with facility to select the decimal point on the display.
Features:
Application:
• On line and continuous measurement of Industrial Temperature and Process values with facility for analog and digital interface to DCS, PLC or Process controllers..
Features:
- Highly accurate and sturdy in operation.
- Elegant in appearance and very easy to operate.
- Accepts standard type of thermocouple or RTD (Pt-100) 2 or 3-wire input.
- High quality membrane keypad.
- Operates on Universal supply of 90 to 250 VAC, 50/60 Hz.
- 4-20 mA Retransmission of high resolution and RS485 interface can be given to PLC.
Application:
• On line and continuous measurement of Industrial Temperature and Process values with facility for analog and digital interface to DCS, PLC or Process controllers..
Temperature Indicator DPI-902
Request Callback
₹ 3675 / Number Get Latest Price
| Model No. | DPI-902 (Part No.: 1304-1) |
| Input Type | RTD, Thermocouple, Current (mA) |
| Mounting Type | Panel |
| Brand | Libratherm |
| Accuracy | +/- 1oC for Thermocouple throughout the range and +/- 0.1oC for Pt-100 for (4-20)mA |
| Resolution | 0.1,0.01,0.001 |
| Country of Origin | Made in India |
Product Description:
Configuration:
Ordering Information:
DPI-902 – Temperature and Process Indicator.
Configuration: (1 AI + 1 AO )
Size: 96 x 96 x 75
Part No: 1304
Key Features:
- Microcontroller based Design.
- Software linearized for better measurement accuracy.
- Available in all standard DIN sizes.
- Works on universal 90-240 VAC.
- Universal and User selectable input from process transmitters/temperature sensors.
- Industrial standard Analog and Digital Interface.
Configuration:
| AI | Analog Input from Process transmitter in the form of 4-20mA or from the Temperature Sensors. |
| AO | Analog Output proportional to Analog input, available in the form of Retransmission output of 4-20mA or optionally 0 -10V. |
| SO | Serial Output in the form of RS-485 on MODBUS RTU interface. |
| Parametes | Description |
|---|---|
| Process Input | 4-20mA or 0-10V |
| Display Range | -2000 to +2000 or 0 to 4000 count with programmable decimal point |
| Resolution | 0.1,0.01,0.001 |
| Temperature Input | Thermocouple type – J, K, RTD(Pt-100) or R, S, B thermocouple |
| Temperature Range | As shown in the Ordering Information table. |
| Resolution | 1oC for thermocouples and 0.1 °C for Pt-100. |
| Sampling rate / Display rate | The input is read @40mS / the display is updated @1 second. |
| Indicating Accuracy | +/- 1oC for Thermocouple throughout the range and +/- 0.1oC for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal |
| Display | 4 digit 0.5" Red 7-segment display for process variable. |
| 4 digit 0.5" Green 7-segment display for input type. | |
| Settings | Using Front panel feather touch key board to set various parameters like span HI/LO values, MODBUS slave ID, Input selection, calibration etc |
| Retransmission Output (Analog) | 4-20mA linearized and proportional to the selected input type and range |
| Supply | (90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional) |
| Size | 96 x 96 x 75 |
| Enclosure | ABS plastic with polycarbonate front graphic. |
Ordering Information:
| Sr. No. | Specifications | Part No. |
|---|---|---|
| 1.1 | Input : J,K,Pt-100,4-20mA | 1304-1 |
| 1.2 | Input : J,K,Pt-100,4-20mA with 4-20mA retransmission | 1304-2 |
| 1.3 | Input : R,S,B T/C | 1304-3 |
| 1.4 | Input : R,S,B T/C + 4-20mA retransmission | 1304-4 |
Libratherm PID-912 PID Temperature Controller
Request Callback
₹ 4500 / Piece Get Latest Price
Product Brochure
| Control Type | PID On/ Off |
| No of digits | 4+7 |
| Output type | Relay |
| Sensor Input | RTD, Thermocouple |
| Voltage | 220-240 V |
We are engaged in Libratherm PID-912 PID Temperature Controller.
Libratherm offers various models of Digital Temperature and Process PID Controllers. The user has the choice of selecting the model based on the type of Input, type of analog or digital interface, and required size. All the models are designed to suit most of the Industrial applications.
This Hight-Temperature PID Controller accepts input from J, K, thermocouple, Pt-100, 4-20mA, and provides SSR output, 4-20mA output, 1 relay output.
Key Features:- Microcontroller based Design
- Software linearized for better measurement accuracy
- Field proven PID algorithm
- Works on universal 90-240VAC
- Universal and User selectable input from process transmitters/temperature sensors
- 1 to 4 Relay or SSR or 4-20mA/0-5V/0-10V control Output
- Industrial standard Analog and Digital Interface
Temperature Process Controller
Request Callback
₹ 5000 / Piece Get Latest Price
Product Brochure
| Control Type | On-Off |
| Input Type | Current (mA), Thermocouple, RTD, Voltage (mV) |
| Model No. | HTC-723 |
| Control output Type | Relay/SSR |
| Brand | Libratherm |
| Temperature Range | Subject to the full range of the specified input |
| Display Type | 4 Digit/7 Segment |
| Frequency | 50/60 Hz |
Minimum order quantity: 1 Piece
Two To Four Set Point On-off Temperature Process Controller
Libratherm offers New version HTC-723 which are designed and developed using the latest micro-controller. The specification incorporated serves the every simple and critical process control applications of the industry. It accepts input from temperature sensors like thermocouple, RTD (Pt-100), Infrared thermocouple, or pyrometers generating mV or mA signals or from the level/flow/pressure/pH transmitters in the form of (4-20) mA. The input signals from thermocouples and RTD (Pt-100) are software Linearized for 1oC/0.1oC indicating accuracy. It can also be used for other process control applications like pressure control, level control etc. accepting input signals from the respective transmitter or transducers.
HTC-723 (Size: 72 x 72 x 120 mm)/ HTC-966 (Size: 96 x 96 x 120 mm) accepts universal input. User can select one of 8 different types of input using back panel DIP switch. This is the added advantage over the fixed type of input.
The controller HTC-723 and HTC-966 has respectively 2 to 4 and 2 to 6 programmable set points. Each can be configured as either High Alarm or Low Alarm or Deviation Alarm or for Off state with programmable ON/OFF hysterisis through user friendly membrane key board. Dual 4 digits display allows simultaneous indications of the process value and the set value. In addition these models can give two nos. retransmission output of 4-20mA proportional to process value, for remote indication of the process value.
Features:
• Highly accurate and sturdy in operation.
• Elegant looks, Very easy to operate.
• Accepts standard type of thermocouple or RTD (Pt-100) 2 or 3-wire input.
• Control output of Relay or DC pulse or TRAIC.
• Programmable Hysterisis.
• User configurable output up to 4 or 6 set points.
• Models available in 2, 3 and 4 configurable set points
• High quality membrane keypad.
• Operates on Universal supply of 90 to 250 VAC, 50/60 Hz.
Application:
• Pressure control
• Heater bank selection
• Star delta changeover
• Level control
• Process industry
• Plastic / Packaging industry
Libratherm offers New version HTC-723 which are designed and developed using the latest micro-controller. The specification incorporated serves the every simple and critical process control applications of the industry. It accepts input from temperature sensors like thermocouple, RTD (Pt-100), Infrared thermocouple, or pyrometers generating mV or mA signals or from the level/flow/pressure/pH transmitters in the form of (4-20) mA. The input signals from thermocouples and RTD (Pt-100) are software Linearized for 1oC/0.1oC indicating accuracy. It can also be used for other process control applications like pressure control, level control etc. accepting input signals from the respective transmitter or transducers.
HTC-723 (Size: 72 x 72 x 120 mm)/ HTC-966 (Size: 96 x 96 x 120 mm) accepts universal input. User can select one of 8 different types of input using back panel DIP switch. This is the added advantage over the fixed type of input.
The controller HTC-723 and HTC-966 has respectively 2 to 4 and 2 to 6 programmable set points. Each can be configured as either High Alarm or Low Alarm or Deviation Alarm or for Off state with programmable ON/OFF hysterisis through user friendly membrane key board. Dual 4 digits display allows simultaneous indications of the process value and the set value. In addition these models can give two nos. retransmission output of 4-20mA proportional to process value, for remote indication of the process value.
Features:
• Highly accurate and sturdy in operation.
• Elegant looks, Very easy to operate.
• Accepts standard type of thermocouple or RTD (Pt-100) 2 or 3-wire input.
• Control output of Relay or DC pulse or TRAIC.
• Programmable Hysterisis.
• User configurable output up to 4 or 6 set points.
• Models available in 2, 3 and 4 configurable set points
• High quality membrane keypad.
• Operates on Universal supply of 90 to 250 VAC, 50/60 Hz.
Application:
• Pressure control
• Heater bank selection
• Star delta changeover
• Level control
• Process industry
• Plastic / Packaging industry
X
Product Videos
View AllContact Us
Kamlesh Panchal (Managing Director)
Libratherm Instruments Private Limited
No. 401-403, Diamond Industrial Estate, Ketki Pada Road
Mumbai - 400068, Maharashtra, India
Send Email