Two-Wire Temperature Transmitter
Libratherm offers Miniature Head Mount Two-Wire Temperature Transmitter Model LTX-3000-H, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since an ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.LTX-3000 requires no separate power supply as it is powered by current drawn from the current loop itself and is thus intrinsically safe when used with appropriate barriers. It is very compact, economically priced and can be directly mounted inside standard heads of the thermocouple or RTD sensors. It can also be easily fitted inside the flameproof/weatherproof head or junction box. It is available for different thermocouples, RTD (Pt-100) duly calibrated for required temperature range with ZERO and SPAN adjustments for on-site calibration. LTX-3000 is available in the standard size of 44mm OD and 26mm height (with the terminals) and centre to centre mounting hole dimension of 33.0 mm so that it fits easily into the standard head.
The Transmitter is also available in DIN Rail compatible modules Model LTX-3000-D, in weatherproof enclosure Model LTX-3000-W, and in flameproof Model LTX-3000-FLP.
The Galvanically isolated versions are also available in DIN rail and weatherproof enclosure as the Model LTX-3000-DI and LTX-3000-WI respectively, where input and output are isolated.
Isolated versions are useful and recommended for the applications, where the transmitters are mounted away from the sensors. The isolation prevents further the RFI/EMI and ground line interference on the 4-20mA signal loop.
New Model LTX-3000-H-2 is available for duplex sensors and can be fitted in the standard Head.
Simplex Sensor Two Wire Temperature Transmitter
Get Best Quote
Approx. Price: Rs 1,250 / Unit
Two Wire Temperature Transmitter (Head Mounted) for Simplex Sensor.
Libratherm offers Simplex Sensor Two Wire Temperature Transmitter Model LTX-3000-H, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since an ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Application | Carry thermocouple or RTD signals over long distance without noise and loss of accuracy |
| Input Value | RTD (Pt-100) or Thermocouple or Variable Resistance |
| Output Value | 4-20 mA |
| Sizes | 44 Dia. x 26 mm (H) |
| Mounting | In Standard or Flameproof head |
| Operating Temp. | 10 - 70 degree Celsius |
| Max. Load Resistance | (Vs-12V) / 20 mA |
Two Wire Temperature Transmitter (Head Mounted) for Simplex Sensor.
Libratherm offers Simplex Sensor Two Wire Temperature Transmitter Model LTX-3000-H, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since an ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Request
Callback
Callback
Yes! I am interested
View PDF
Duplex Sensor Two Wire Temperature Transmitter
Get Best Quote
Approx. Price: Rs 2,500 / Unit
LTX-3000-H-2 Two Wire Temperature Transmitter (Head Mounted) for Duplex Sensor.
Libratherm offers Duplex Sensor Two Wire Temperature Transmitter Model LTX-3000-H2, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since an ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Application | Long distance transmission of low level signal generated by RTD or Thermocouple on 2 wire. . |
| Input Value | RTD (Pt-100) or Thermocouple or Variable Resistance |
| Output Value | 4-20 mA |
| Sizes | 44 Dia. x 26 mm (H) |
| Mounting | In Standard or Flameproof head |
| Operating Temp. | 10 - 70 degree Celsius |
| Max. Load Resistance | (Vs-12V) / 20 mA |
LTX-3000-H-2 Two Wire Temperature Transmitter (Head Mounted) for Duplex Sensor.
Libratherm offers Duplex Sensor Two Wire Temperature Transmitter Model LTX-3000-H2, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since an ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Request
Callback
Callback
Yes! I am interested
View PDF
Field mounted Two Wire Temperature Transmitter
Get Best Quote
Approx. Price: Rs 2,250 / Unit
LTX-3000-W Two Wire Temperature Transmitter (In Weather proof IP 65 enclosure and field mounted).
Libratherm offers Miniature Head Mount Two Wire Temperature Transmitter Model LTX-3000-W, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Application | Long distance transmission of low level signal generated by RTD or Thermocouple on 2 wire. . |
| Input Value | RTD (Pt-100) or Thermocouple or Variable Resistance |
| Output Value | 4-20mA |
| Sizes | 80 x 80 x 57 mm |
| Mounting | On-field or on site on the wall using 4 screws |
| Operating Temp. | 10 - 70 degree Celsius |
| Max. Load Resistance | (Vs-12V) / 20 mA |
LTX-3000-W Two Wire Temperature Transmitter (In Weather proof IP 65 enclosure and field mounted).
Libratherm offers Miniature Head Mount Two Wire Temperature Transmitter Model LTX-3000-W, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Request
Callback
Callback
Additional Information:
- Item Code: LTX-3000-W
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: Mumbai
- Production Capacity: 1000
- Delivery Time: Ex-Stock
- Packaging Details: Paper Corrugated Box
Yes! I am interested
View PDF
Isolated Two Wire Temperature Transmitter
Get Best Quote
Approx. Price: Rs 3,250 / Unit
LTX-3000-WI Isolated Two Wire Temperature Transmitter (In Weatherproof enclosure field mounted).
Libratherm offers Isolated Two Wire Temperature Transmitter Model LTX-3000-WI, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since an ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Application | Long distance transmission of low level signal generated by RTD or Thermocouple on 2 wire. . |
| Brand | LIBRATHERM |
| Input Value | RTD (Pt-100) or Thermocouple or Variable Resistance |
| Output Value | 4-20mA |
| Sizes | 80 x 80 x 57 mm |
| Mounting | On-field or on site on the wall using 4 screws |
| Operating Temp. | 10 - 70 degree Celsius |
| Max. Load Resistance | (Vs-12V) / 20 mA |
LTX-3000-WI Isolated Two Wire Temperature Transmitter (In Weatherproof enclosure field mounted).
Libratherm offers Isolated Two Wire Temperature Transmitter Model LTX-3000-WI, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since an ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Request
Callback
Callback
Additional Information:
- Item Code: LTX-3000-WI
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: Mumbai
- Production Capacity: 1000
- Delivery Time: Ex-Stock
- Packaging Details: Paper Corrugated Box
Yes! I am interested
View PDF
DIN Rail Mounted Two Wire Temperature Transmitter
Get Best Quote
Approx. Price: Rs 1,750 / Unit
Two Wire Temperature Transmitter (DIN Rail Mounted).
Libratherm offers DIN Rail Mounted Two Wire Temperature Transmitter Model LTX-3000-D, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since an ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Application | Long distance transmission of low level signal generated by RTD or Thermocouple on 2 wire. . |
| Sizes | 22 x 75 x 100 mm. |
| Mounting | On 35 mm DIN rail |
| Operating Temp. | 10 - 70 degree Celsius |
| Max. Load Resistance | (Vs-12V) / 20 mA |
| Input Value | RTD (Pt-100) or Thermocouple or Variable Resistance |
| Output Value | 4-20mA |
Two Wire Temperature Transmitter (DIN Rail Mounted).
Libratherm offers DIN Rail Mounted Two Wire Temperature Transmitter Model LTX-3000-D, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since an ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Request
Callback
Callback
Additional Information:
- Item Code: LTX-3000-D
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: Mumbai
- Production Capacity: 1000
- Delivery Time: Ex-Stock
- Packaging Details: Paper Corrugated Box
Yes! I am interested
View PDF
DIN Rail Mounted Isolated Two Wire Temperature Transmitter
Get Best Quote
Approx. Price: Rs 3,500 / Unit
LTX-3000-DI Isolated Two Wire Temperature Transmitter (DIN Rail Mounted).
Libratherm offers DIN Rail Mounted Isolated Two Wire Temperature Transmitter Model LTX-3000-DI, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since an ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Application | Long distance transmission of low level signal generated by RTD or Thermocouple on 2 wire. . |
| Input Value | RTD (Pt-100) or Thermocouple or Variable Resistance |
| Output Value | 4-20mA Isolated |
| Sizes | 22 x 75 x 100 mm |
| Mounting | On 35 mm DIN rail |
| Operating Temp. | 10 - 70 degree Celsius |
| Max. Load Resistance | (Vs-12V) / 20 mA |
LTX-3000-DI Isolated Two Wire Temperature Transmitter (DIN Rail Mounted).
Libratherm offers DIN Rail Mounted Isolated Two Wire Temperature Transmitter Model LTX-3000-DI, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since an ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Request
Callback
Callback
Additional Information:
- Item Code: LTX-3000-DI
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: Mumbai
- Production Capacity: 1000
- Delivery Time: Ex-Stock
- Packaging Details: Paper Corrugated Box
Yes! I am interested
View PDF
RTD (Pt-100) Sensor Two Wire Temperature Transmitter
Get Best Quote
Approx. Price: Rs 3,000 / Unit
LTX-3000-WS Two Wire Temperature Transmitter with RTD (Pt-100) sensor.
Libratherm offers Miniature Head Mount Two Wire Temperature Transmitter Model LTX-3000-WS, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Operating Temp. | 10 - 70 degree Celsius |
| Max. Load Resistance | (Vs-12V) / 20 mA |
| Output | (4-20) mA, two wire and loop powered |
LTX-3000-WS Two Wire Temperature Transmitter with RTD (Pt-100) sensor.
Libratherm offers Miniature Head Mount Two Wire Temperature Transmitter Model LTX-3000-WS, which accepts (Pt-100) or thermocouple or variable resistance signal as the input and provides dc current output of (4-20) mA proportional to mV or resistance values. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since ordinary pair of copper wires can easily be used to transmit the measured temperature without the drop or loss of signal. In addition, transmitting the current signal is more advantageous, since it is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearly calibrated to the signal produced by a thermocouple or RTD sensors and not to the actual temperature.
Request
Callback
Callback
Additional Information:
- Item Code: LTX-3000-WS
- Pay Mode Terms: T/T (Bank Transfer)
- Port of Dispatch: Mumbai
- Production Capacity: 1000
- Delivery Time: Ex-Stock
- Packaging Details: Paper Corrugated Box
Yes! I am interested
View PDF
X